benjamin alexander
Active Member
hey all so after much deliberation and annoyance i have bitten the bullet and put together a cabinet out of something i had laying around because i set myself a budget for the build too.
im after quality above all else, personal smoke only for medicinal use at first, extra to come later once i can handle it for others. my strain of choice is blz bud to start off with.
anyhoo the cfls will be in a sealed compartment seperated from the plant by a sheet of perspex
will be running 8-10 cfls, 24 watt, 4 as lower lighting in individual sealed boxes in the flowering area sharing a ventilation system using 3" duct.
the dimensions of the total flowering area (top of resi/net pot 2 the sheet of perspex) are 24" high, 20" wide and 14" deep, the relatively tall area is why i decided to use lower side lighting and try out a scrog? would you reccomend this or just top or fim it to get it nice and bushy? after yield for area and quality.
i was looking at a bubbleponic setup, about 10 litre 2.6 gallon resi or a soil grow, best nutes for quality either way.
so my questions are-
1- will 8-10 24 watt cfls be enough for my area?
2- what cfm would you reccomend for the exhaust? looking at a 120cfm fan,will this be enough with a passive intake? more than prepared to add more
3- can i use 3000k and 5000k bulbs?
4- would you suggest soil or bubbleponics for better quality?
5- are the canna range ok either way? soil/water (i can get it locally)
6- what nutes would you use?
7- in this much area how would you recommend to grrow/train? lst? scrog? fimm?
8- anyone had any experience with blz bud? any idea of approx yield?
cheers, ben
im after quality above all else, personal smoke only for medicinal use at first, extra to come later once i can handle it for others. my strain of choice is blz bud to start off with.
anyhoo the cfls will be in a sealed compartment seperated from the plant by a sheet of perspex
will be running 8-10 cfls, 24 watt, 4 as lower lighting in individual sealed boxes in the flowering area sharing a ventilation system using 3" duct.
the dimensions of the total flowering area (top of resi/net pot 2 the sheet of perspex) are 24" high, 20" wide and 14" deep, the relatively tall area is why i decided to use lower side lighting and try out a scrog? would you reccomend this or just top or fim it to get it nice and bushy? after yield for area and quality.
i was looking at a bubbleponic setup, about 10 litre 2.6 gallon resi or a soil grow, best nutes for quality either way.
so my questions are-
1- will 8-10 24 watt cfls be enough for my area?
2- what cfm would you reccomend for the exhaust? looking at a 120cfm fan,will this be enough with a passive intake? more than prepared to add more
3- can i use 3000k and 5000k bulbs?
4- would you suggest soil or bubbleponics for better quality?
5- are the canna range ok either way? soil/water (i can get it locally)
6- what nutes would you use?
7- in this much area how would you recommend to grrow/train? lst? scrog? fimm?
8- anyone had any experience with blz bud? any idea of approx yield?
cheers, ben