How are my ten day old seedlings looking??

Clonex

Clonex

Well-Known Member
Ok ,
I would dis-mount the fan you have now and put it lower down in the box, use it as an inline fan to bring fresh air in near your plants, it has to be low as hot air rises,

In the hole it leaves , put 1 of these http://www.basementlighting.com/Merchant2/merchant.mv?Screen=PROD&Store_Code=1&Product_Code=ITBF, you will also need 100mm ducting which is also on that site http://www.basementlighting.com/home.htm , you may need to adjust the hole , depending on how big it is now......

You will also need a filter if you are concerned with smell.
 
gedbhoy

gedbhoy

Member
have light 3ft away had HP on fur 45mins or so temp is at 28c/85f hummidity is at 60.....what do yous think.....switch back to cfl until ready to flower......is this too much for 4week old plants....dont want to fuck these up
 
gedbhoy

gedbhoy

Member
thanks clonex and what do you think in the mean time....revert back to cfls?
that is extractor turned around bringing cold air in.......so kp an eye on them
 
Clonex

Clonex

Well-Known Member
I would stick to the 400w hid , much better , they will grow faster , 4 weeks old , they can take it , 3ft is to far away , lowering or raising your light will not help your temp,
Lower it down to 2ft, they will not burn at that range and thats the only concern,
If you want to lower your temp , get that fan blowing cooler air in , or at least make a passive hole were it is going to go , this will draw cool air in, until you get the other fan,
Another tip is to aim that little household fan directly at your bulb, it will help disperse the heat.

I have so much of what you need lying in my shed that i do not need , shame i cant let you have it ,are you South west by any chance, i will post it to you if you want it.
 
dr2brains

dr2brains

Well-Known Member
You need to repot them with dirt up to the bottom set of leaves, this should help the root growth and help stalk become stronger. Don't for get a fan....
01-25-2012 BL1.jpg01-28-2012 BL1.jpg02-16-2012 BL1.jpg
 
gedbhoy

gedbhoy

Member
no clonex im in the north but drive lol......ill cut a new hole 2morow at bottom as u suggest and put extractor down at bottom get the inline duct fan and ducting ordered and put that in hole at top where extractor was as that hole is the same size as inline fan.....thanks again clonex
 
gedbhoy

gedbhoy

Member
That is light 2ft away temp and humidity much the same......do you have an ebay account or such and i would by the equipment from u??:weed:
 
Clonex

Clonex

Well-Known Member
Nah i don't use Ebay , i would not charge you anyway , it's stuff i used to use when i was also growing in a smaller area,
i have no need to profit from it and would be happy if you put it to use,
It's simple , if you want it pm me a safe address where ever you like and i will post you the fan + ducting,
If you look at my threads i have a slightly larger op going now...

Someone on here has just sent me 120 seeds , check my multiple strains thread...
 
gedbhoy

gedbhoy

Member
thanks....hope it does not get too hot in there in mean time....ill leave window open and wardrobe door ajar to help keep temp okay
 
gedbhoy

gedbhoy

Member
lol nice one dannyboy602 hopefully it all ends well......clonex has played a big part in in....i had killed about 10 feminesed plants b4 lol over watering too much light too soon etc....u name a way to fk up a seedling and i done it nitemare!!!!got these three to 4weeks and got them under MH just there so need to do a couple of alterations to wardrobe and hopefully get these to harvest
 
gedbhoy

gedbhoy

Member
IM going to purchase a carbon filter any suggestions on a cheap but adequate one and do i connect ducting to your fan and other end to carbon filter????do i keep it in the wardrobe or outside?? i 4got to ask what size the fan is before i go cutting holes lol my heads fried way this green :joint: lol.....cant wait to harvest my own:weed:
 
gedbhoy

gedbhoy

Member
its back on clonex thankfully.......i bet you feel like a baby sitter with me:cry:lol....typical newbee!!!!honestley cant thank you enuff for your input:weed:
 
Clonex

Clonex

Well-Known Member
gedbhoy said:
its back on clonex thankfully.......i bet you feel like a baby sitter with me:cry:lol....typical newbee!!!!honestley cant thank you enuff for your input:weed:
Click to expand...
No worries umbre , gotta start somewhere , iv'e had lots of help from here :joint:
 
Clonex

Clonex

Well-Known Member
gedbhoy said:
clonex i 4got to ask what size the fan is before i go cutting holes lol my heads fried way this green :joint: lol.....cant wait to harvest my own:weed:
Click to expand...
Cant remember lol , i will no tomoz though , no light in the shed , i think it's a 6inch but i will measure and post a picture of it tomoz morning for ya ....
 
You must log in or register to reply here.
Top