Jack's Classic /JR PETERS (Don't waste money on anything else)

Do you already use Jacks?

  • Yes

  • No

  • I wish

  • I like to overpay for fertilizer and pay for water in a bottle


Results are only viewable after voting.

Jajaja725

Member
Aren't feed charts that burn the shit out of your plants just an industry standard?
I agree. I guess Jack's has jumped on that bandwagon now.

I'm about to flip to flower. Been using the Jacks 321 formulae mostly with additions. I've read that I can keep using 321 ratio, but then other posts and YT videos recommend changing to Bloom, or 222 ratio, etc.. Not sure what to do. Suggestions would be helpful. Thank you.
 

Tolerance Break

Well-Known Member
I agree. I guess Jack's has jumped on that bandwagon now.

I'm about to flip to flower. Been using the Jacks 321 formulae mostly with additions. I've read that I can keep using 321 ratio, but then other posts and YT videos recommend changing to Bloom, or 222 ratio, etc.. Not sure what to do. Suggestions would be helpful. Thank you.
Its plant and feed dependent. Here is a photo of my grow. At week 4 of flower I went to 2.4 and I kept it there until week 6 or 7, and while the buds got pretty respectable in size, you can tell they are burnt to shit. I think if I had, say, a scorpion Diablo and CO2 suplementation, 2.4 EC might have worked, but as is I think I jumped the shark by at least .6 EC. Its also a bit strain dependent, so unless you are trying to experiment with a strain over multiple runs to perfect it, its going to be a bit of a guessing game. 20210927_130515.jpg
 

Rurumo

Well-Known Member
I agree. I guess Jack's has jumped on that bandwagon now.

I'm about to flip to flower. Been using the Jacks 321 formulae mostly with additions. I've read that I can keep using 321 ratio, but then other posts and YT videos recommend changing to Bloom, or 222 ratio, etc.. Not sure what to do. Suggestions would be helpful. Thank you.
Don't do 2-2-2, that doesn't sound necessary. The 1 at the end is just magnesium, some people get away with just using Jack's A/B, but 321 does well with LEDs-I need the extra mag anyway. Using that 321 ratio you need to find the right EC for your plants. I rarely flower higher than 1.2 and I've been much happier with the quality of the flower at lower ECs, but each person's setup is different and some people do like higher ECs.
 

Lenin1917

Well-Known Member
When I run salts and soilless it’s jacks or masterblend. Soil it’s just basic organic dry amendments and teas. Gonna give hempie buckets and coco a shot when I reset in a few months so it’ll be jacks.
 

xtsho

Well-Known Member
Jack's hasn't jumped on any dosage bandwagon. The instructions for full-strength ~ 3.6/2.4/1.1 g/gal has been the same for at least ten years, likely much longer.
They have jumped on the cannabis bandwagon. I don't blame them as they're a business and the goal is to make money.

But they now have feed schedules with 6 different products not counting epsom salts. It used to be just the 5-12-26, calnit, and epsom.

Example of their cannabis lineup. Chances are you won't notice any difference than just using the 3-2-1 but this gives them 4 more products to sell.

Jack's 15-6-17
Jack's 12-4-16
Jack's 10-30-20
Jack's 5-12-26
Jack's 15-0-0
Jack's 7-15-30
Epsom salt

"No matter your growing environment, if it's your first time growing Cannabis or Hemp or you are a professional, we want to help walk you through every step of the growing season. Our schedules and formulas will help to ensure Jack's delivers the exact nutrient balance according to your Cannabis & Hemp crop requirements."

 
Last edited:

Tolerance Break

Well-Known Member
They have jumped on the cannabis bandwagon. I don't blame them as their a business and the goal is to make money.

But they now have feed schedules with 6 different products not counting epsom salts. It used to be just the 5-12-26, calnit, and epsom.

Example of their cannabis lineup. Chances are you won't notice any difference than just using the 3-2-1 but this gives them 4 more products to sell.

Jack's 15-6-17
Jack's 12-4-16
Jack's 10-30-20
Jack's 5-12-26
Jack's 15-0-0
Jack's 7-15-30
Epsom salt

"No matter your growing environment, if it's your first time growing Cannabis or Hemp or you are a professional, we want to help walk you through every step of the growing season. Our schedules and formulas will help to ensure Jack's delivers the exact nutrient balance according to your Cannabis & Hemp crop requirements."

I emailed them about this after buying 25 lbs bags of A+B, asking if they have any thoughts on using lower EC with different styles of hydro.

Only email I have sent them that never got a response lol

Still, Im happy I decided to go with Jacks.
 

lusidghost

Well-Known Member
They have jumped on the cannabis bandwagon. I don't blame them as their a business and the goal is to make money.

But they now have feed schedules with 6 different products not counting epsom salts. It used to be just the 5-12-26, calnit, and epsom.

Example of their cannabis lineup. Chances are you won't notice any difference than just using the 3-2-1 but this gives them 4 more products to sell.

Jack's 15-6-17
Jack's 12-4-16
Jack's 10-30-20
Jack's 5-12-26
Jack's 15-0-0
Jack's 7-15-30
Epsom salt

"No matter your growing environment, if it's your first time growing Cannabis or Hemp or you are a professional, we want to help walk you through every step of the growing season. Our schedules and formulas will help to ensure Jack's delivers the exact nutrient balance according to your Cannabis & Hemp crop requirements."

I listened to a podcast with Jack's reps talking about the bloom formula, and I think it might be worth using. I like how they say to cut out the 321 for a couple of weeks while you use it, so it's not adding a bunch of PK on top of the base nutrients.
 

Billy the Mountain

Well-Known Member
It's great Jack's has introduced new products and has embraced the cannabis community.

Dropping all all calcium for the first few weeks of flower seems odd but I haven't tried it yet.

I heard Dr. Peters on the Cannabis Cultivation podcast; she's well worth a listen.
 

Jajaja725

Member
Its plant and feed dependent. Here is a photo of my grow. At week 4 of flower I went to 2.4 and I kept it there until week 6 or 7, and while the buds got pretty respectable in size, you can tell they are burnt to shit. I think if I had, say, a scorpion Diablo and CO2 suplementation, 2.4 EC might have worked, but as is I think I jumped the shark by at least .6 EC. Its also a bit strain dependent, so unless you are trying to experiment with a strain over multiple runs to perfect it, its going to be a bit of a guessing game. View attachment 5062866
Wow, looks fantastic (despite the burns).
I see that your medium setup is similar to what I did a few years ago but failed due to spider mites. I used a fabric batting instead of coco mats. I'm about to try again with a couple of plants, and want to ask you:
Did you stay at the 321 ratio throughout flower?
Are they in 4 inch or 6 inch cubes?
In your flood and drain, how high do you flood to? Eg., top of the cube/half way up, etc..
How long do they stay flooded before draining?
DTW or recirculating?
Anything I should watch out for? Any tips or tricks?
Srry for all the Q's. I'm excited that someone succeeded in a system I'm about to try again after failing before. :)
 

xtsho

Well-Known Member
It's great Jack's has introduced new products and has embraced the cannabis community.

Dropping all all calcium for the first few weeks of flower seems odd but I haven't tried it yet.

I heard Dr. Peters on the Cannabis Cultivation podcast; she's well worth a listen.
I'm not saying it's a bad thing. I have nothing against the company. Hopefully more people will use their products for cannabis and move away from the overpriced cartoon labeled nonsense. At least with Jacks they are not playing stupid games and making ridiculous claims. Plus they are very open about the ingredients in their products so you know exactly what you're using.

I still would just use the 5-12-26 and calnit myself.
 

Jajaja725

Member
It's great Jack's has introduced new products and has embraced the cannabis community.

Dropping all all calcium for the first few weeks of flower seems odd but I haven't tried it yet.

I heard Dr. Peters on the Cannabis Cultivation podcast; she's well worth a listen.
I just fed with bloom formulae. yes, it's strange, no calcium. I wonder if that was a practical decision, since the goal was to make a 1 part bloom booster formulae, and they didn't want to risk precipitation...I'll check out that podcast. Thanks!
 

Jajaja725

Member
Jack's hasn't jumped on any dosage bandwagon. The instructions for full-strength ~ 3.6/2.4/1.1 g/gal has been the same for at least ten years, likely much longer.
...of course, I can be wrong. I feel like something has changed. I recall Gene Green's YT video breaking down the elements, and the ppm coming out to be around 800 with the 321 ratio...maybe he was wrong? lol I don't know...
 

Rurumo

Well-Known Member
I just fed with bloom formulae. yes, it's strange, no calcium. I wonder if that was a practical decision, since the goal was to make a 1 part bloom booster formulae, and they didn't want to risk precipitation...I'll check out that podcast. Thanks!
I'm almost certain this is the case. Calcium is one of the most important nutrients for a flowering cannabis plant. This product seems more about selling bags than selling a product that works better in this situation than A/B. This new cannabis lineup is just Jack's powdered take on selling a 12 different liquid nute bottles.
 

Billy the Mountain

Well-Known Member
I'm almost certain this is the case. Calcium is one of the most important nutrients for a flowering cannabis plant. This product seems more about selling bags than selling a product that works better in this situation than A/B. This new cannabis lineup is just Jack's powdered take on selling a 12 different liquid nute bottles.
That's a bit of hyperbole.
They've introduced a couple of one-part dry nutes (tap and ro).
They don't sell any enhancers, exploders, etc,. nor make any dubious claims.
 

Tolerance Break

Well-Known Member
Wow, looks fantastic (despite the burns).
I see that your medium setup is similar to what I did a few years ago but failed due to spider mites. I used a fabric batting instead of coco mats. I'm about to try again with a couple of plants, and want to ask you:
Did you stay at the 321 ratio throughout flower?
Are they in 4 inch or 6 inch cubes?
In your flood and drain, how high do you flood to? Eg., top of the cube/half way up, etc..
How long do they stay flooded before draining?
DTW or recirculating?
Anything I should watch out for? Any tips or tricks?
Srry for all the Q's. I'm excited that someone succeeded in a system I'm about to try again after failing before. :)
All good, hope this can be of help.

I use 4 inch cubes I believe, ill double check that when I get home from work. I used bloom the first 2 weeks of flower, but I wasn't using anything to keep the water sterile and I had my LEDs running 100%, so i got root rot fairly quickly and had to battle that off with h202 before using pool shock for a more long term (cheaper) sterile solution.

After that, I worked my way up to 2.4 rather quickly (another mistake) from 1.2. I time how long it took for the water to reach the drain, with only 1 spacer, and it was just about 1 minutes and 40 seconds, so I set my timer to 2 minutes. This brought the water just barely to the top of the coco mat, which let the rockwool take in some water, but not enough to soak the cube. This allowed the roots to breathe. I flooded 3 times a day, once an hour after lights on (contemplating 2 next grow), once mid day, and once an hour before lights off. I used a 17 gallon res, changed, scrubbed with white vinegar, and rinsed with RO, once a week. When I realized 2.4 was to high, I mixed the 3.6, 2.4, 1 solution at 13 gallons and diluted it to my preferred EC.
 

Attachments

Top