Gquebed
Well-Known Member
First thing tomorrow. Think i saw it at my grow shop.
Lemon Kush, COBs and flood tables
- Thread starter Gquebed
- Start date
First thing tomorrow. Think i saw it at my grow shop.
HydroRed
Well-Known Member
I've had PM a couple times before I finished my previous rooms. Green cure wiped it out in 1 day and didnt come back before I could get through my run and clean up the room. I did it in the first like 3 wks of flower and all was good so you should be just fine in veg.
Tim Fox
Well-Known Member
yup me to, green cure got rid of it completly
Mechanicalbuds
Active Member
Helllo y'all. I'm not in Canada, (forgive me) but what is this green cure? Is it available in the U.S.? I've got reaccuring PM. I've done the 6:1 water-milk with baking soda and soap. The h2o2, straight and diluted. I've even sprayed 3:1 water with bleach! Still every day, new PM growth.
HydroRed
Well-Known Member
Its just potassium bicabonate. Its organic approved, non toxic, affordable and most of all -it works! Green Cure is widely available on Amazon, most hydro shops, and I believe even Walmart. You gotta get underneath the leaves and drench the entire plant from top to bottom when treating for PM. If it is still coming back after multiple proper treatments then you have other issues that need to be addressed in the grow room like RH too high, proper air exchange, cleanliness, dirty clones entering the grow etc.
Gquebed
Well-Known Member
Yes. I did see it at my grow shop. 2 years ago apparently.
They dont carry it anymore. Not available in Canada any longer.
So ill have to order online and spray with something else in the meantime.
Apparently since legalization up here a number of products have been taken off grow shop shelves...
Mechanicalbuds
Active Member
Dude I know! Its winter, so humidity is low. 30 %. I use an Hvac blower for air movement. I clean my room every other day. I bleach my walls and floor. In so stumped as to where to go next. My room is 8×22. Blower mounted on the celing on one side blowing across the celing
Mechanicalbuds
Active Member
I think my main problem is unhealthy plants being more suspetable to PM. I've got dead spots. Leaf curl. Yellowing leaves. Stunted growth, ECT. I'm so stumped. I believe its my water. Too high in something. Is 250ppm from the tap. I'm working on trucking in water from out a town. I don't have money for ro.
HydroRed
Well-Known Member
Where your air is being pulled from is something to consider if looking for where PM is coming from. Also, are you bringing in clones from an outside source.Just a thought since I dont know anything at all about your setup.
Last edited:
Gquebed
Well-Known Member
Well i gave em a good clipping last night. Think i got all the moldy spots off. Then just now i hosed em down with 3% peroxide. Mixed about 100mls into 750mls of tap water. Ill do that a couple times today and tomorrow, depending on how they react.
Here a few pics before the treatment just afte lights on.
Plan to flip in a couple days. Just bringing up the light intensity right now...
Here a few pics before the treatment just afte lights on.
Plan to flip in a couple days. Just bringing up the light intensity right now...
Attachments
Tim Fox
Well-Known Member
i think its the same stuff brewers use for making beer, its differant than just plain baking soda which is sodium bicarb, verses the bicarbonate? i think, its been a while, while baking soda and hydrogen poroxide does a wonderful job, it did seem the green cure worked better,, at least at keeping the PM away
Tim Fox
Well-Known Member
yup, the one time i had PM in a grow it rode in on the clones,, never saw it until flower
Hey its great to see you around by the way!!
HydroRed
Well-Known Member
Good to see you. Havent seen you around as much as I used to. Hope all is good in your garden my friend!
Are those tri-foliates in there?
Thundercat
Well-Known Member
Looking proper man. Sucks about the pm but hopefully you got it all killed.
Gquebed
Well-Known Member
Ya... i think ive seen four or five plants like that... maybe more...
I know they tend to be rare, but not sure what why how or whatever.
I was also wondering if they were legit or just part of the funky growth from whatever is causing the weird shit...
HydroRed
Well-Known Member
Just a plant characteristic that pops up once in a while. Just dont see many running clones with it as I dont really consider it an "awesome" trait or anything. Not that its bad, just dont make it special either. I just happened to notice it when I was looking was all.
Last edited:
Tim Fox
Well-Known Member
It's easy to shrink into our own little worlds when we grow our own weed the stuff piles up I jars, I could go on but you get the idea, ya life is grand , my cobs will out live me and they sale clones in stores here now , here have a beer or toke on me
HydroRed
Well-Known Member
Sounds just right.
Gquebed
Well-Known Member
So a pic update... would like some feedback on how things look...
Im seeing a lot of things in hydro i didnt see before growing in promix.
Like the twisting or deforming of leaves, which seems to be abating now, but its consistent. Not sure if i should be concerned.
Wondering if my N looks high with how dark green the leaves are and some light curling.
The red or purple stems... seems to be on old growth mostly, but i see it on some new growth too.
The very light coloured veins in the leaves... something to be concerned about?
Also, the rippled or swollen leaves... classic sign of overwatering but... how is that possible in hydro? Lol
Anyway... hoping for some comments to help improve this crop. Im about 3 or 4 days or so since flipping. Figuring to cut back the N significantly and add some aeration to the res, hoping it will improve nute uptake some and maybe relieve the overwatering thing? I dunno...
Oh ya... pH has been in a good range, drifting from 5.8 to 6.2. Water temp has stayed between 68 and 72f. But PPMs slowly rise... last 4 days went fron 1240 to 1300.
@HydroRed
@Thundercat
@Renfro
@ANC
Im seeing a lot of things in hydro i didnt see before growing in promix.
Like the twisting or deforming of leaves, which seems to be abating now, but its consistent. Not sure if i should be concerned.
Wondering if my N looks high with how dark green the leaves are and some light curling.
The red or purple stems... seems to be on old growth mostly, but i see it on some new growth too.
The very light coloured veins in the leaves... something to be concerned about?
Also, the rippled or swollen leaves... classic sign of overwatering but... how is that possible in hydro? Lol
Anyway... hoping for some comments to help improve this crop. Im about 3 or 4 days or so since flipping. Figuring to cut back the N significantly and add some aeration to the res, hoping it will improve nute uptake some and maybe relieve the overwatering thing? I dunno...
Oh ya... pH has been in a good range, drifting from 5.8 to 6.2. Water temp has stayed between 68 and 72f. But PPMs slowly rise... last 4 days went fron 1240 to 1300.
@HydroRed
@Thundercat
@Renfro
@ANC
