Snowgirl82
Member
What is the best size LED light for an 4x4 tent?
That light has some crazy PPFD numbers even at 2 ft! 2.8 umol/J is no joke either. I need a 4x4 lol.I have HLG boards now and they're sweet, but the ChilLED shit looks awesome. You can build a kit or get a prebuilt one.
This would rule a 4x4, but it sure ain't cheap.
Growcraft X6 - 600W LED Grow Light - Commercial Grade
Growcraft Light Spectrum Options Passive Cooling Linear Bar Design Thin Profile – Only 1.375in Tall Rugged T Slot Bar Design Oversized surface area for maximum heat dissipation Remote Power Driver Location Lower your heat load by removing power driver outside grow area ShareTweetPinShareEmailPrintchilledgrowlights.com
Ok, I'll have to check that out. Cause right now I have a Mars Hydro ts3000 in it and it's way to hot. I can't keep the temp down even with fans inside.Something like this
Horticulture Lighting Group HLG 550 V2 R-Spec Full-Spectrum 480W Quantum Board LED Grow Light
Order your Horticulture Lighting Group HLG 550 V2 R-Spec Full-Spectrum 480W Quantum Board LED Grow Light today from Rightbud. Lowest price guaranteed, FREE shipping & factory warranty.rightbud.com
Invest in a better extraction fan and make sure your removing the heat from the house and the thermometer is not in direct light.It stays between 82°-93° I can't get them lower
Dimming will reduce the heat yes.Ok, I'll look into a different fan. If I dim the lights or change the voltage will that help with the temp too?
A circulating fan will not cool but it will help make sure the air is well mixed and even temp like you say.Ok good. Yes I have the heat going out. Maybe another fan too inside will even it out?
That fan on high should easily pull all the heat out of a 4x4.4" Inline Fan Spec: W/Variable Speed Control ( Variable - Full- Off)
- Volt/Phase: 120V/60HZ
- Power Input:63W
- Amperage: .52A
- RPM: 2680
- CFM: 210
- Noise DB: 56
Can you put up a picture of your setup? I feel like there is something that is probably obvious just getting missed. We all have our moments.Do I need to have some kind of ventilation from the tent besides the carbon filter and extraction fan?