I've never grown marijuana before. I do not want to start outside though
, I'm interested in experimenting with this first. I have a few questions...some I've seen answered, but I'd rather ask here with specifications 
I'm planning on growing one plant in a ten inch by three foot (tall) wooden stand. It's hallow and conceals well. The plant will be in a pot at the bottom (on the floor). This tall cover will have to be lifted over the plant/equiptment, and placed to the side, when I water each day. I found a two foot tall slender lamp, with the bulb at the top. It fits very well inside. If I decided to stick this in the contraption, the blub would be about 14-16 inches from the top of the pot's soil. The bulb says "120volt 60hz AC only". I think it's 100watt, because it says replace with a 100watt or less blub. Is this strong enough to grow one plant? Also, how close could the plant get to the blub?
IF a 120volt 60hz AC only will definatly not work, I will buy a better light, and embed it to the TOP of the case. This would give me an extra foot of grow room before it's moved outside. If it will work, I'll use it until I feel the need to either move the plant outside, or get a better light to be put a foot higher.
In addition, I may tape reflective paper around the plant's base (not getting to close to the light).
My second issue is air. This case is almost airtight, because it can't be revealed. Is this a big issue? I could attach a handheld fan to the inside if that'd do anything...or maybe drill some small holes.
Any suggestions?
Thanks for your time guys.


I'm planning on growing one plant in a ten inch by three foot (tall) wooden stand. It's hallow and conceals well. The plant will be in a pot at the bottom (on the floor). This tall cover will have to be lifted over the plant/equiptment, and placed to the side, when I water each day. I found a two foot tall slender lamp, with the bulb at the top. It fits very well inside. If I decided to stick this in the contraption, the blub would be about 14-16 inches from the top of the pot's soil. The bulb says "120volt 60hz AC only". I think it's 100watt, because it says replace with a 100watt or less blub. Is this strong enough to grow one plant? Also, how close could the plant get to the blub?
IF a 120volt 60hz AC only will definatly not work, I will buy a better light, and embed it to the TOP of the case. This would give me an extra foot of grow room before it's moved outside. If it will work, I'll use it until I feel the need to either move the plant outside, or get a better light to be put a foot higher.
In addition, I may tape reflective paper around the plant's base (not getting to close to the light).
My second issue is air. This case is almost airtight, because it can't be revealed. Is this a big issue? I could attach a handheld fan to the inside if that'd do anything...or maybe drill some small holes.

Thanks for your time guys.
