Stelthy's 600W Hps Project! (New-Cab)
- Thread starter stelthy
- Start date
las fingerez
Well-Known Member
i'll have some eggs sunny side up pls 
(fish slice)
good darts bro
(fish slice)good darts bro
littlegrower2004
Well-Known Member
looking good to go. i would say most things left can be achieved in a day with just a couple shops visited.
iso oil is basically trim placed in a jar with isopropyl alcohol 91-99% drowning the trim. shake for a couple mins or let sit for a few days. then filter the alcohol out using a coffee filter to ensure no trim gets into the alcohol. pour the alcohol into a glass container, cooking pan or plate, not a jar. then let sit for a few days with a fan to evaporate the alcohol off or use heat such as a hair dryer or boil a pan of water and place the glass container on that for a faster evaporation rate. then your left with a oily hash like substance that is pretty much pure THC.
heres my favorite link for a quick wash, ive got good results from this method. http://www.icmag.com/ic/showthread.php?t=66497
iso oil is basically trim placed in a jar with isopropyl alcohol 91-99% drowning the trim. shake for a couple mins or let sit for a few days. then filter the alcohol out using a coffee filter to ensure no trim gets into the alcohol. pour the alcohol into a glass container, cooking pan or plate, not a jar. then let sit for a few days with a fan to evaporate the alcohol off or use heat such as a hair dryer or boil a pan of water and place the glass container on that for a faster evaporation rate. then your left with a oily hash like substance that is pretty much pure THC.
heres my favorite link for a quick wash, ive got good results from this method. http://www.icmag.com/ic/showthread.php?t=66497
Attachments
stelthy
Well-Known Member
looking good to go. i would say most things left can be achieved in a day with just a couple shops visited.
iso oil is basically trim placed in a jar with isopropyl alcohol 91-99% drowning the trim. shake for a couple mins or let sit for a few days. then filter the alcohol out using a coffee filter to ensure no trim gets into the alcohol. pour the alcohol into a glass container, cooking pan or plate, not a jar. then let sit for a few days with a fan to evaporate the alcohol off or use heat such as a hair dryer or boil a pan of water and place the glass container on that for a faster evaporation rate. then your left with a oily hash like substance that is pretty much pure THC.
heres my favorite link for a quick wash, ive got good results from this method. http://www.icmag.com/ic/showthread.php?t=66497
Hmm I am gunna have to try this
How much will an oZ of trim make ?? Whats the best method of smoking this 'oil' ?? REP! for the info, cheers for that mate - STELTHY 
littlegrower2004
Well-Known Member
well i cant say for sure but i would guess i put about a half ounce in a jar and shook for about 3 to 5 min and got about 3 of those blades with atleast twice as much on each. its too sticky to weigh so i just leave it on the blade until im ready to smoke a bowl and then take nice chunk and put it on top of my bowl. that is in a bong so its not harsh so a pipe might be a bit rough. my buddy lined his joint up with some that i brought over and he was falling asleep in about 10 min haha. since you like rolling up you should try lining your paper with it after you roll it. another buddy on here grinded his trim up to get more in the jar and then used a drill bit with a zip tie on it to aggitate it much better then shaking and got a very nice amount off just a few runs. i just really enjoy it cause its about a hour process with a good sticky result that can blast anyone if you use the right amount. my suggestion is always use a bit more then you think will be good hahah to ensure it will get you. might cause your cab to be put off from being too high haha.
stelthy
Well-Known Member
Next I decided to wire in the Green Night Light, I couldn't find a Green CFL, so I settled for a 15W Green Sign Bulb...thats GLS as far as I can tell. I bought a bulb holder for about 3 quid and bought a shitty cheap lamp, and 'hi-jacked'
the 3A plug, cable and switch not bad for 4 quid With a little drilling and some clipping etc.. I had it installed - STELTHY 
stelthy
Well-Known Member
I decided to buy a SCROG screen... I didn't get the chance to go to wicks so I picked up a 1m2 sheet from a local garden centre, it was about 8 quid.. but still.. I used just over a quarter of the screen, and cut it to size so it would fit around the items in the cab at the desired height - STELTHY
stelthy
Well-Known Member
SHOPPING LIST NOW READS AS FOLLOWS:-
Air filter + ducting (if required)
Small CANNA nuit range
PH down (Phosphorus)
Pippets
Measuring cylinder
I should be able to tick the bottom 3 off in the next day or so, then its just the last bit I need to get some cash for.. Then the units good for going on sale - STELTHY
Air filter + ducting (if required) Small CANNA nuit range PH down (Phosphorus) Pippets Measuring cylinderI should be able to tick the bottom 3 off in the next day or so, then its just the last bit I need to get some cash for.. Then the units good for going on sale
- STELTHY
stelthy
Well-Known Member
These are pretty much the final tasks, The out-take fan's light leak will be resolved as and when I can get a small 4" filter, and the light gap in the front will be dealt with some time this week. I also plan to use some Black Spray Paint to tidy up the left side of the cab, around the out-take ducts, just to tidy the Mini-Cab up and a final cable tidy will be included - STELTHY
loveweed420
Well-Known Member
pictures didn't come up =/
stelthy
Well-Known Member
littlegrower2004
Well-Known Member
still no pics
stelthy
Well-Known Member
Fuck! ... I'll have ago re doing them again this morning.. I dunno why they won't display, I did everything I normal do to upload pics, hmm ....- STELTHY
I've re-reloaded the pics and keeping my fingers crossed ya can all see 'em ?? - STELTHY
Similar threads
- Locked
