Trying My Hand At Glass Pipe Making

Status
Not open for further replies.

researchkitty

Well-Known Member
Hi Crypt. :)

Secret: For a midtower computer case, try replacing the side panel with acrylic clear from home depot and add two 80x80x20mm fans one intaking on the side of the window and one exhausting around the video card area. That'll keep your temps in check no matter what nvidia card you have in there. :)
 

secretweapon

Active Member
Hi Crypt. :)

Secret: For a midtower computer case, try replacing the side panel with acrylic clear from home depot and add two 80x80x20mm fans one intaking on the side of the window and one exhausting around the video card area. That'll keep your temps in check no matter what nvidia card you have in there. :)

Yea... I've built a pc grow box that I wanted to put a 70w hps in a cooltube to isolate the heat and have the plants closer to the bulb. When I get home ill take a pic and post it.

Btw you have some sick looking glass!
 

researchkitty

Well-Known Member
ganjaluva2009 has exceeded their stored private messages quota and cannot accept further messages until they clear some space.

Gan: Its a 2400 mile trip, give it another day or two for the post office. :) :)
 

ganjaluva2009

Well-Known Member
ganjaluva2009 has exceeded their stored private messages quota and cannot accept further messages until they clear some space.

Gan: Its a 2400 mile trip, give it another day or two for the post office. :) :)
Np kitty....they are some slow ass people in the postal service....thanks for the response...im deleted my pm's...thanks for the glass....ganja
 

researchkitty

Well-Known Member



Loch Ness sparkle background with Lava Orange and Berry Gumboldt alternating lines...... I made the tubing of course :)




Another piece from my first stack, same as the spoons in the last post. It was the last of that tubing so I need to make some more of that, I like the contrast a lot.




This is what the tubing looks like before it's wigwag'd and spiraled and turned into a pipe/sherlock/whatever. This is after all the work of sleeving 50x5mm clear tubing with 14 sticks of color inside and another tube of 25x4mm tubing using a shop vac to suck out air bubbles while the Mirage goes at full blast. I sweat at least a half cup of water each tube pull. :)




These are using more of that fun Loch Ness color. On the 14mm slide and the spoon next to it, there is Loch Ness mixed with Amber Purple for a unique effect. The other two that are more green sparkles with the color UNDER the sparkles is Loch Ness OVER Amber Purple. Everyone said AP on top, I say no, Loch Ness mofo. It changes color from green to red and purples in good light.

That's it for now. Going to prep some more tube for work tomorrow on it. Thanks everyone.
 

Sr. Verde

Well-Known Member
I can even ship to in a taco, inside a taco, within a taco bell, thats in a kfc, within a mall thats INSIDE your brain for $5. :) Pick a piece already Sir! :)
I'm good on the pipes :)




old picture of my glass collection





I just don't smoke bowls on the regular anymore...I admit pipes are pretty though, the only pipe (first glass) I had before my friend broke.... and I've only used that shitty $18 dragon pipe for JWH/bud when I had it..... (didn't buy more)


Now adays it's oil only in the bong, and buds go into the volcano :lol:




I have asthma, so I just don't like smoking pipes, I do smoke the occasional joint though.





Now if you can do an oil dome or something then we can talk shipping costs :)
 

dannyboy602

Well-Known Member
That's really cool. Can you make glass pipe bombs? My kid asked me cause he wants to bring them into science class or some shit.
 

poplars

Well-Known Member
That's really cool. Can you make glass pipe bombs? My kid asked me cause he wants to bring them into science class or some shit.
kidna weird request... you can by leaving one small hole in one side of the pipe, that can be filled with gunpowder, with a fuse, and candle wax to seal. very simple... not recommended unless this is just an educational thing in a science class.....
 

jmozzy

Member
Thanks......... And thanks again for todays blowout tutorial. Here's the two I made after watching you............... The first was the small one, the second the larger of the two. I got a real good feel for the squiggles on the second. :)





Abrimagery.com also has 'boroshorts" ( http://www.dichroicimagery.com/product_info.php?products_id=90697 ).... for $10/lb its sticks of all major color companies and they are pieces that break in shipping etc....... Due to this its going to be more of the popular colors rather than discounted sticks in weird colors. Ordered 5 Lbs of em today after hearing great reviews so hope to have a better color selection soon. Right now I'm almost done with cool colors, and mostly blah ones left. :)

how much for the yellow greenish one on the left ?
 

Sr. Verde

Well-Known Member
kidna weird request... you can by leaving one small hole in one side of the pipe, that can be filled with gunpowder, with a fuse, and candle wax to seal. very simple... not recommended unless this is just an educational thing in a science class.....

I feel like it's a joke... it had to be a joke...



School... kids.... dad wanting to give his kid a pipe bomb to take to school...... ? :lol:

bad joke poorly delivered? at least I HOPE :lol: :lol:
 
Status
Not open for further replies.
Top