vero18 burned out?

Thorhax

Thorhax

Well-Known Member
Positivity said:
I'd say...

Ditch the wire nuts and just cut the wires to length. They'll block light and possibly get zorched from the heat coming off the emitter

Space the emitters out evenly on the heat sink to distribute the heat evenly

If the screws aren't lining up don't use one screw...better off with a thermal adhesive pad. Even better would be a predrilled hole and a self tapping screw....or supras TIM plus kapton tape

And from here it looks like you have the wiring wrong with two positives going out instead of just one from the lead..hard to tell

And one last thing. Clean the heatsink up. Sand it down then wipe down with ISO alcohol until it's clean and shiny. That film won't help things

Just my 2c...looks good otherwise. Nice case and setup
Click to expand...
dont i have to cover the exposed wire?

i also ordered some http://www.arcticsilver.com/arctic_silver_thermal_adhesive.htm so i won't be screwing anything anymore..

also thank you for the post. will be cleaning things up even more and checking my wiring
 
Positivity

Positivity

Well-Known Member
Thorhax said:
dont i have to cover the exposed wire?

i also ordered some http://www.arcticsilver.com/arctic_silver_thermal_adhesive.htm so i won't be screwing anything anymore..

also thank you for the post. will be cleaning things up even more and checking my wiring
Click to expand...

There shouldn't be any exposed wire if you cut it to length and run it from emitter to emitter. Maybe I'm missing something though.

Good luck with the project, can't wait to see it lighted up and growing!
 
Thecouchlock

Thecouchlock

Well-Known Member
Nc87 said:
This thread is exactly why you should build your own. I am greatful for this post because now we all can learn from it. There is a plethora of knowledge around here, plenty enough to diy and save yourself a shitload of money. Thanks for posting op.

Sent from my SAMSUNG-SM-G900A using Rollitup mobile app
Click to expand...
I am not knocking him or any of you, but I am a little afraid of fucking something up and burning my house down.
 
Thorhax

Thorhax

Well-Known Member
Taught myself how to solder, soldered all connections.
Cut down lots of the excess wire
Bought article silver thermal adhesive
Will post pics when complete
 
Positivity

Positivity

Well-Known Member
Thecouchlock said:
I am not knocking him or any of you, but I am a little afraid of fucking something up and burning my house down.
Click to expand...
What happens when your home ceiling fan starts getting noisy?

You pay someone to change it out for you?

Then yah...better stay away from DIY led.

Might be better to run a 1000w hid in a closet...:P

Just be careful like anything else. Auto fire extinguishers and high temp shutdowns should be in any grow room regardless of tech used and who built it.
 
Last edited:
AquariusPanta

AquariusPanta

Well-Known Member
Positivity said:
What happens when your home ceiling fan starts getting noisy?

You pay someone to change it out for you?

Then yah...better stay away from DIY led.

Might be better to run a 1000w hid in a closet...:P

Just be careful like anything else. Auto fire extinguishers and high temp shutdowns should be in any grow room regardless of tech used and who built it.
Click to expand...
I was actually thinking about picking up an AFE.

I gotta learn a little more about high temp shutdowns, as I currently have none set up in place.
 
Positivity

Positivity

Well-Known Member
This is what I've used for years now. Gives a lot more peace of mind leaving the garden for extended times. I was way more worried when I ran hid without these things..

High temp sensor

http://www.horticulturesource.com/product_info.php?products_id=9453&gclid=CMb-qKLWhMICFZFhfgode10AIA

Just started using this maybe a year ago. Nice knowing there's something in place..just in case..

http://www.horticulturesource.com/flame-defender-fire-extinguisher-4-4-lbs-2-kg-covers-4-1-24-meters-diameter--p7822/
 
AquariusPanta

AquariusPanta

Well-Known Member
I would like to upload a few excel work sheets. Since the Vero series was just recently upgraded (thank you jesus santa god), I figured I'd practice some of my excel skills and do a few sheets for the lower models, like V10 and V13.

Would you advise creating a new thread or adding to an existing?
 
Positivity

Positivity

Well-Known Member
AquariusPanta said:
I would like to upload a few excel work sheets. Since the Vero series was just recently upgraded (thank you jesus santa god), I figured I'd practice some of my excel skills and do a few sheets for the lower models, like V10 and V13.

Would you advise creating a new thread or adding to an existing?
Click to expand...
Vero thread...sounds good....:joint:.... I'll be looking into those if the high bin cxas aren't available.
 
You must log in or register to reply here.
Top