where to get colateral silver
- Thread starter LittleT
- Start date
Hugo Phurst
Well-Known Member
CS is expensive.
Get some distilled water, a car battery charger, some wire, and a silver coin, then make your own.
Have fun
Get some distilled water, a car battery charger, some wire, and a silver coin, then make your own.
Have fun
BigHornBuds
Well-Known Member
Most places that carry CS have it in 20-30ppm . 50ppm will work a lot better.
Pet stores will have it ,
If your just breaking ground with your seeds, you have lots of time to make your own.
Pet stores will have it ,
If your just breaking ground with your seeds, you have lots of time to make your own.
raymont
Well-Known Member
i started 5 auto gorilla glue fems---i pulled 1 plant and started spraying plant 2 times a day every day for 3 weeks now---only balls i see is 1 on each branch connection---buds are thumb size with no male sacs on buds or anywhere else--have used a large 20 dollar bottle--will continue until its gone.maybe because its an auto?any ideas
CoB_nUt
Well-Known Member
can buy CS from amazon. Dilute it down with distilled water.Bam Reversal solution. easy peasy. Here the tutorial I used to make mine.
All the info you need is in here
https://www.420magazine.com/community/threads/how-to-make-feminized-seeds-with-colloidal-silver.213974/
CoB_nUt
Well-Known Member
This is the brand I use.
CoB_nUt
Well-Known Member
Yo can also make your own. It is cheaper in the long run if you plan on reversing alot.
Str8 from the bottle? How oftern are you spraying? I use 8oz of the CS to 24 oz of distilled water. 32 oz of reversing spray. Only takes me 4-6 ozs to turn a plant.
I start spraying 2xday a week before flip, keep spraying 1xday until I see the first sac open.
Str8 from the bottle? How oftern are you spraying? I use 8oz of the CS to 24 oz of distilled water. 32 oz of reversing spray. Only takes me 4-6 ozs to turn a plant.
I start spraying 2xday a week before flip, keep spraying 1xday until I see the first sac open.
CoB_nUt
Well-Known Member
Understood, dilute or undiluted works. I just use less CS by diluting it. They will turn regardless. Some strains turn sooner tho with stronger ppms cs.
xtsho
Well-Known Member
Probably too late to help you now but the STS method is more reliable and only requires spraying a couple times.
https://www.rollitup.org/t/applying-silver-nitrate-sodium-thiosulfate-mixture-for-fem-pollen.937161/
https://www.rollitup.org/t/applying-silver-nitrate-sodium-thiosulfate-mixture-for-fem-pollen.937161/
well the plan was 5 female gorilla glue---turn 1 and make a few seed on another plant--also i have 2 girl scout cookies autos and i am spraying 1 of them --to make a few seed --i think i see a few balls in a lower bud of the girl scout cookies so it may be a girl scout cookie crossed with gorilla glue--- all 7 are sharing the same home----a girl scout gorilla glue cookie!!!
Here's an Amazon source https://amzn.to/2AXhAgD of plain colloidal silver. I use a mixture of sodium thiosulfate and silver nitrate. Make sure you do not smoke or ingest any treated plant.
CoB_nUt
Well-Known Member
I've read up on the sts in a few threads here, you are in some of those threads. Once my CS runs out, I'm gonna give the sts a shot. Didn't see any mention of how many times to spray it. I did see it mentioned it doesn't take nearly as much spraying as CS. I'll admit, I didn't dig thru all the meat of the the threads. Just mainly how to make it and the precautions when mixing it.
As well as a few links to source it.
I don't make very many seeds. I'd like to keep stock solutions of A& B refrigerated and make small batches of sts as needed.
I only spray a branch. Don't need to turn a whole plant unless it's a solo clone.
Any suggestions as to how much to make in a small batch to turn a branch or two?
xtsho
Well-Known Member
You can reduce the quantities of chemicals in proportion to make smaller batches. I spray two days in a row and then once again in a week. Be very careful where you spray as the solution will stain things purple.
Good luck.
Bodyne
Well-Known Member
quick question, from a couple diff recipes Ive found on site, all claiming success. By my math I get 1/2 or 1/4 teaspoon per qt of 500ppm CS. Does that sound about right? Realizing thats a higher than usual number to begin with on the ppm, diluted down to approximately 100, give or take. I read 50 a lot, but also see folks having it a bit stronger with success also. Just curious, thanks
Last edited: