Superstoner's new 3 rail, 50gal system, 36-40oz every 2 weeks.

[superstoner1]

I just dont think there is anything better for taste. I've had 30 & 40 year smokers say they have never had anything close.

 

[DarthBlazeAnthony]

Its called "smart bin" and is in the automotive section.

do you prefer the smart bin because it is thicker to keep rez temps lower? It is out of stock on wal mart but I only need 30 gallon rez anyways so I picked up a pretty nice 27 gal tote from home depot.

 

[DarthBlazeAnthony]

Off the top of my head here it is.

Veg stage
700-750ppm total
PH always 5.6-5.8

Pbp grow 8ml per gallon
Silica blast 3ml per gal
Hydroguard 3ml per gal
Liquid karma 2ml per gal
Vitamino 3ml per gallon
Calmag 1ml per galgal
Half a scoop of pondzyme

How often do you replace the rez water?

 

[superstoner1]

do you prefer the smart bin because it is thicker to keep rez temps lower? It is out of stock on wal mart but I only need 30 gallon rez anyways so I picked up a pretty nice 27 gal tote from home depot.

I liked it because I'm a cheap bastard and it was 1\3-1\4 the cost of anything similar and the thickness is a plus. It's a heavy bitch. The black and yellow 27gal totes are good just not big enough for me but they make great cloners and veg tubs.

 

[superstoner1]

How often do you replace the rez water?

In veg i was changing every 3 weeks but have changed to every 2 weeks because I am running 4 totes now and that many plants will suck the life out of a res quickly. Plants are much happier now.

 

[Tone5500]

SS when you get a chance could you give me the model number and brand off that relay you have that u use on your recycle timer please I'm going to wire up one for my veg and clone totes thanks

 

[sold777]

This post is so good thanks

 

[superstoner1]

SS when you get a chance could you give me the model number and brand off that relay you have that u use on your recycle timer please I'm going to wire up one for my veg and clone totes thanks

I get my relays from Grainger. Just use a good heavy duty one rated for more amps than needed with a 120v coil. The double pole single throw in a 30amp should work.

 

[Tone5500]

I get my relays from Grainger. Just use a good heavy duty one rated for more amps than needed with a 120v coil. The double pole single throw in a 30amp should work.

Thank you

 

[Tone5500]

I get my relays from Grainger. Just use a good heavy duty one rated for more amps than needed with a 120v coil. The double pole single throw in a 30amp should work.

http://www.frys.com/product/1667853 Would this one work

 

[superstoner1]

You don't need a dual throw(dpdt) you need a single throw(dpst), try this one.
http://m.grainger.com/mobile/product/DAYTON-Relay-5Z546

 

[jpdnkstr]

What brand of Pondzyme do you use? Do you start with RO water?

 

[Bigdogfirecrotch]

I think I'm going to be the guinea pig on the sealed vertical reflectors unless someone has used them before and thinks otherwise. I will post my results...

Looking at these :
https://www.1000bulbs.com/product/112475/GROW-904700.html

 

[Tone5500]

You don't need a dual throw(dpdt) you need a single throw(dpst), try this one.
http://m.grainger.com/mobile/product/DAYTON-Relay-5Z546

Sweet that's the one I'll go with , do you hard wire within the timer itself or do you just hard wire a pig tail into the relay and then use a plug in the time thanx agin

 

[superstoner1]

Pondzyme with barley. No, tap.

 

[superstoner1]

Sweet that's the one I with , do you hard wire within the timer itself or do you just hard wire a pig tail into the relay and then use a plug in the time thanx agin

No, just a simple 2 prong cord from a light or any old appliance like a blender or toaster.

 

[Tone5500]

No, just a simple 2 prong cord from a light or any old appliance like a blender or toaster.

Koo koo thanks

 

[Bigdogfirecrotch]

SS I notice in your new F build you used green sprayers that are screwed into T's..can you elaborate on that

 

[superstoner1]

I was out of red ones and bought those at Lowes to test.

 

[DarthBlazeAnthony]

What brand of Pondzyme do you use? Do you start with RO water?

I don't know if this is true or not so hopefully someone can elaborate. It was suggested to me to exclusively use RO water in a hydro setup because tap water will not allow you to control PH levels properly. I tried tap and could not lower PH no matter what. I am only using RO now.