Diggs99 First grow, Lets talk about it!

[H.A.F.]

Do you wear gloves?

Yes, and you can scrape them off at the end too

 

[diggs99]

i think i may be able to dry my bud in the room my tents are in, ill prob have to run 2 of my humdifiers to keep rh up tho, if not they will dry too fast.

think im gonna use bread trays like renfro does. i can build a coulpe shelves to place them.

 

[diggs99]

Day 47 since flip

Stove ran out of pellets throughout the night and temps dropped to 62f in the tent. Rh stayed consistant at 41%

That's the lowest it's been since they sprouted. Hopefully it won't be an issue

 

[diggs99]

New genetics have been ordered

Wedding cake by Pheno Finder
Sunset Sherbet by Pheno Finder
Gorilla Zkittlez by Barneys


I honestly don't know which of the 3 I wanna run first.

Anyone following this thread have any experience growing any of the 3?

 

[H.A.F.]

Day 47 since flip

Stove ran out of pellets throughout the night and temps dropped to 62f in the tent. Rh stayed consistant at 41%

That's the lowest it's been since they sprouted. Hopefully it won't be an issue

We had a cold spell in the teens/20's, and mine got down to 60. I really don't think they are as susceptible to cold (within reason) as they are to heat. One day at 5 degrees too high can kill them (or start them on that path with no hope of a decent recovery), but the same thing with it colder not so much.

 

[H.A.F.]

Wuzzup!

Hey, I am working on the grow room and junk, but I had another one of those thoughts to pass on.

On my to-do list today is to get rid of the THC collection from my old habits... and to stop collecting it.

I use a plain old glass bubbler. Good quality (GRAV straight base) with replaceable 14mm bowls and/or attachments. That tar-like gunk that accumulates between the bowl and the water I always counted as 'fair game', save it for hard times - and have needed it. I would scrape it out when it was warm and it slides out like butter. Roll the 'gob' in the ash-tray until it falls off, then let it dry out. (ash is already burnt - bad taste, no bad effects )

Like I said, I had a system because it was a good back-up. Fast forward, and I have been googling the best methods of long term storage. I have compressed pucks of pure keif, and bud that is about 6months old (and still amazing!). Is it better to save it raw, or de-carb it and then save it? Vacuum seal, or leave air and have Boveda packs? and so on. Helllllooooooo! McFly!!!!!




So anyway, that's something to think about LOL

 

[H.A.F.]

There's a company on Amazon called interplanetary development that machines a high-grade t-press. I gave them good karma on the review, and they tossed me some extra swag and t-press inserts.

Oh, and I am H.A.F.
Have you clued to the moniker yet? LOL

 

[Beachwalker]

There's a company on Amazon called interplanetary development that machines a high-grade t-press. I gave them good karma on the review, and they tossed me some extra swag and t-press inserts.

Oh, and I am H.A.F.
Have you clued to the moniker yet? LOL

Hey I bought a press from that company! it was the other kind with the screw cap ends but it was pretty good (but they didn't give me any freebies tho :/ )

 

[H.A.F.]

And I still hit that half-burnt tarry shit that is stuck to the bowl every time I replace the screen, because it is still awesome LOL

But seriously, that shit get's you hiiiiiiiigh, but it is a nasty, dirty high!

 

[H.A.F.]

Hey I bought a press from that company! it was the other kind with the screw cap ends but it was pretty good (but they didn't give me any freebies tho :/ )

I was their first or second customer, and I got a "thank you what else can we do" email from the owner - instead of that "give me stars because you bought my shit" spam you usually get.

I told him that to get a thinner puck you needed an extra insert or two so you didn't bottom out the press and risk cross-threading the top. He sent me an extra small and large insert and a handful of stickers

 

[diggs99]

Thanks for dropping all that useful info HAF

Lots of good stuff in there.

I want to look into one of those machines you mentioned earlier for making edibles. That seems like it would be good for me.

 

[diggs99]

Guess who's jewellers loupe finally showed up!!!

This guy right here
<=========

Expect a bunch of tricomes pics starting tomorrow morning.

 

[Gollyboy]

New genetics have been ordered

Wedding cake by Pheno Finder
Sunset Sherbet by Pheno Finder
Gorilla Zkittlez by Barneys



I honestly don't know which of the 3 I wanna run first.


I'm doing gorrila skittlez m8

Anyone following this thread have any experience growing any of the 3?

 

[Gollyboy]

https://www.rollitup.org/p/14765566/ that's my thread if you want to have a scan at them digs

 

[.RootDown]

Guess who's jewellers loupe finally showed up!!!

This guy right here
<=========

Expect a bunch of tricomes pics starting tomorrow morning.

It's about time you got it!
Based on your experience I may have to order mine soon. I've only got three months until I need one but apparently Amazon stores these on the South Pole.

That's the painful thing about online shopping- when I click the "order" button shipping is already taking too long to get it to me.

 

[diggs99]

lol

i ordered my new lights off amazon too, they are supposed to be here tomorrow or tuesday, only ordered them early last week, so we shall see

Normally they are good with getting stuff to us in pretty good time.

 

[Couch_Lock]

lol

i ordered my new lights off amazon too, they are supposed to be here tomorrow or tuesday, only ordered them early last week, so we shall see

Normally they are good with getting stuff to us in pretty good time.

Nice. I have a CMH arriving tomorrow too. The Timber 2 VL will be built this Tuesday and then shipped 2 day priority. I called RainDan and took advantage of the 8 day lead time (switched spectrum from 3500k to 3000k)......

 

[diggs99]

Nice. I have a CMH arriving tomorrow too. The Timber 2 VL will be built this Tuesday and then shipped 2 day priority. I called RainDan and took advantage of the 8 day lead time (switched spectrum from 3500k to 3000k)......

bet your gonna love that timber. I hope you do

i was so close to pulling the trigger on a couple of those , but the price kept getting me

I ended buying 2 x 315 cmh lights plus 2x phillips bulbs , all for 600cad taxes included.

 

[Couch_Lock]

bet your gonna love that timber. I hope you do

i was so close to pulling the trigger on a couple of those , but the price kept getting me

I ended buying 2 x 315 cmh lights plus 2x phillips bulbs , all for 600cad taxes included.

Thats a great price for you Canadians. Plan on goin vertical? I bought a CMH that gives me the option to hang it vertically.

https://www.amazon.com/gp/product/B07D8QTSW2/ref=ppx_od_dt_b_asin_title_s00?ie=UTF8&psc=1


Because the reflectors cut back on my tents height accomodations like 6 to 10 inches......My tent is only 80 inches tall, fabric pots about a foot high also.

 

[Big Perm]

Thats a great price for you Canadians. Plan on goin vertical? I bought a CMH that gives me the option to hang it vertically.

https://www.amazon.com/gp/product/B07D8QTSW2/ref=ppx_od_dt_b_asin_title_s00?ie=UTF8&psc=1


Because the reflectors cut back on my tents height accomodations like 6 to 10 inches......My tent is only 80 inches tall, fabric pots about a foot high also.

I've always wanted to give vertical a shot. I wish when I got my lights I would have thought about it. I guess I can get a socket and hang it...I might have to try it sometime.