dgarcad
Well-Known Member
Agreed. I can think of one time I didn’t get tracking but everything showed with like you said special friends. The homie is one of the best. The plants talk for themselves.
CSI humboldt thread
- Thread starter THCbreeder
- Start date
TankHankerous
Well-Known Member
Chem D x T1000/Old Family Purple
6/21 dropped 7 fem seeds in cup of water
6/22 seeds sunk to bottom, placed between damp paper towels inside plastic bag in dark place for no more than 24 hours
6/23 planted 7 germinated seeds in starter cups filled with Promix and Dynomyco. spray watered plain tap water (5.8 ph), humidity dome on, RH at 80%/80F
6/25 all sprouts above ground, removed dome. Maintaining above 70% rh, temp in mid 70s to 80s
7/2 watered with 1ml Tribus/gal and water ph to 5.8, continue to hover around 70% rh and warm temps in the 80s
7/6 watered with 5.8 ph water, 70% RH, 80s temp, PAR 300-350. Leaves drooping- probably should have been watered at 10am instead of 10pm....
7/9 transplant to 1 gal pots with Promix and Dynomyco. Water with 2ml/gal of Hydroguard, 1 ml/gal of Rapid Start, and 1 ml/gal of Tribus, ph to 5.8. Maintain RH in mid 60s and temp in the mid 80s, PAR at canopy about 400. Set timer for 18/6 schedule. (Lights off 10am-4pm)
After the transplant the gals are looking kind of crappy but with some better watering practices I think it will be for the better.
This run I am going with Jack's 321 ratio in promix with LEDs.I've been growing since the covid lockdowns but have yet to have a harvest I'd truly enjoy smoking. But this time is different. I have a hunch that I've been underfeeding with fear of overfeeding and short changing my plants
6/21 dropped 7 fem seeds in cup of water
6/22 seeds sunk to bottom, placed between damp paper towels inside plastic bag in dark place for no more than 24 hours
6/23 planted 7 germinated seeds in starter cups filled with Promix and Dynomyco. spray watered plain tap water (5.8 ph), humidity dome on, RH at 80%/80F
6/25 all sprouts above ground, removed dome. Maintaining above 70% rh, temp in mid 70s to 80s
7/2 watered with 1ml Tribus/gal and water ph to 5.8, continue to hover around 70% rh and warm temps in the 80s
7/6 watered with 5.8 ph water, 70% RH, 80s temp, PAR 300-350. Leaves drooping- probably should have been watered at 10am instead of 10pm....
7/9 transplant to 1 gal pots with Promix and Dynomyco. Water with 2ml/gal of Hydroguard, 1 ml/gal of Rapid Start, and 1 ml/gal of Tribus, ph to 5.8. Maintain RH in mid 60s and temp in the mid 80s, PAR at canopy about 400. Set timer for 18/6 schedule. (Lights off 10am-4pm)
After the transplant the gals are looking kind of crappy but with some better watering practices I think it will be for the better.
This run I am going with Jack's 321 ratio in promix with LEDs.I've been growing since the covid lockdowns but have yet to have a harvest I'd truly enjoy smoking. But this time is different. I have a hunch that I've been underfeeding with fear of overfeeding and short changing my plants
Gemtree
Well-Known Member
I have 2 chem d x t1000 in veg look for the variegated leaves for the chem d Dom ones. Neither of mine have it but my chem d x notso headband did
TankHankerous
Well-Known Member
Very nice! If you have any pics/info about the grow I'd be interested in checking it out and comparing notes
Week4@inCharge
Well-Known Member
Just got some freebies Obama Care (Chemdawg & Obama Kush), thought it was a joke until I flipped the package and saw Humboldt CSI sticker on it... well shit.
Jamaican_Dreams
Well-Known Member
No but I bet there’s some bangers to be found in that mix.
Week4@inCharge
Well-Known Member
I'm thinking the same, if I just got one from the pack, I'd probably jizz in my pants..
Week4@inCharge
Well-Known Member
I'll have a free tent in September
Exactly the same with GHS or even seedisms before them the s1s will all be all over the show regardless who from
TankHankerous
Well-Known Member
Update: from 7/9 (Chem D x T1000/ Old Family Purlple)
7/10 Day 1 Veg (18/6 light schedule)
Week 1 7/12 watered with jacks 321, ph 5.8, (KootMed Week 1, 50% Strength: 1.8 g- Part A, 0.6 g- Epsom salt, 1.2 g- Part B)= approx. 1.1 EC (550 ppm)
Week 1 7/15 watered with jacks 321, ph 5.8, (KootMed Week 1, 50% Strength: 1.8 g- Part A, 0.6 g- Epsom salt, 1.2 g- Part B)= approx. 1.1 EC (550 ppm),
and 1 ml per gal tribus
Week 2: 7/18 watered with jacks 321, ph 5.8, (KootMed Week 2, 80% Strength: 3.0 g- Part A, 1.0 g- Epsom salt, 2.0 g- Part B)= approx. 1.6EC (800 ppm)
Week 2: 7/21 watered with Hydroguard 2ml/gal, jacks 321, ph 5.8, (KootMed Week 2, 80% Strength: 3.0 g- Part A, 1.0 g- Epsom salt, 2.0 g- Part B)= approx. 1.6EC (800 ppm)
Topped tonight, these mugs are all systems go!
7/10 Day 1 Veg (18/6 light schedule)
Week 1 7/12 watered with jacks 321, ph 5.8, (KootMed Week 1, 50% Strength: 1.8 g- Part A, 0.6 g- Epsom salt, 1.2 g- Part B)= approx. 1.1 EC (550 ppm)
Week 1 7/15 watered with jacks 321, ph 5.8, (KootMed Week 1, 50% Strength: 1.8 g- Part A, 0.6 g- Epsom salt, 1.2 g- Part B)= approx. 1.1 EC (550 ppm),
and 1 ml per gal tribus
Week 2: 7/18 watered with jacks 321, ph 5.8, (KootMed Week 2, 80% Strength: 3.0 g- Part A, 1.0 g- Epsom salt, 2.0 g- Part B)= approx. 1.6EC (800 ppm)
Week 2: 7/21 watered with Hydroguard 2ml/gal, jacks 321, ph 5.8, (KootMed Week 2, 80% Strength: 3.0 g- Part A, 1.0 g- Epsom salt, 2.0 g- Part B)= approx. 1.6EC (800 ppm)
Topped tonight, these mugs are all systems go!
Last edited:
silverhazefiend
Well-Known Member
Can I get more info on that drip lip looking top situation that would be good for my little tent
Wholebunchanumbers
Active Member
Hey Bud! Just running some 3d printed parts on solo cups, draining onto a serving dish which drains into a nutrient reservoir bucket. If you want the .stl files I could email or upload or something if you like. The "kratky" bottoms are new this run, so far so good but I reckon they'll just about lift the cups by the end of the run haha. Cheers for the interest!
Attachments
silverhazefiend
Well-Known Member
Damn this is dope like for a home grower with limited space this is cool yea I’ll dm you with my email and how I go about printing them
I don’t kno anything about CAD it makes me want to learn tho .. id just do some drips on a timer maybe twice a day so I wouldn’t need the drain just the top feed and a small res