Hook Daddy
Well-Known Member
You get the like and dm messages after posting for a while, it doesn’t take long. @gooshpoo uses the ac infinity controller I believe, he may be able to answer your question.
Thermoelectric wine cooler drying and curing - DIY
- Thread starter Hook Daddy
- Start date
I would definitely just get the uis plug.
gooshpoo
Well-Known Member
Get the UIS control outlet , it will also power the controller.
Thanks everyone, I was aiming to save a few bucks but considering the cost of the UIS outlet and the time needed to find an alternative its a pretty easy choice.
Does Cannatrol have any real competitors when it comes to their 'home' unit?
They offer a larger industrial model, and also handle retrofits in existing buildings.
I have 15+ years in automation, programming, and project development and am considering making some career moves.
They offer a larger industrial model, and also handle retrofits in existing buildings.
I have 15+ years in automation, programming, and project development and am considering making some career moves.
SnidleyBluntash
Well-Known Member
Do it. And sell it at cost to RIO users
Blue brother
Well-Known Member
Show off!..... says the jealous person. Haha, very nice!
Thank you! Honestly it's a hobby that keeps me grounded, gives me that feeling of progress when I need it, and I get to give away some of what I enjoy growing. It's much less expensive and dangerous than my motorcycle hobby so the wife doesn't care about my spending lol
You can get the 79 Pro controller on ebay for 70$. It has 2 outlets, so I have the Koolatron in one with power on all the time, and the other I have for the dehumidifier that I have toggle on and off depending on humidity. It uses it's own probe sensor also. Great little units for those with anxiety who need the wifi to be able to check on humidity and temp from anywhere lol
taproot
Well-Known Member
I'm curious if anybody has tried the 2 way humidity beads or boveda packs to pull out the moisture and then add back as needed? I see the wine coolers you guys are building have a dehu in them, I was just curious if taking some 2 way beads that have been dried out would pull the moisture out of fresh cannabis that needs to be dried...and as it drys and cures release it back as needed.
Then you'd only need to worry about regulated the temp, doesn't the wine coolers have a built in temp controller?
Then you'd only need to worry about regulated the temp, doesn't the wine coolers have a built in temp controller?
Billytheluther
Well-Known Member
It might work but as im sure you know, those beads will reach a saturation point and cause excess humidity, they pool water into them (not pull but literally make a pool of water)
taproot
Well-Known Member
Hmm, the ones that go into cigar humidors don't pool. I guess if they got over saturated they might but I've never heard anybody says this. I'm switching over to the beads for my cigars as the Boveda get expensive over time.
gooshpoo
Well-Known Member
Awesome man, The 79 pro is a great option im thinking of grabbing one to free up a controller =)
Hook Daddy
Well-Known Member
If that worked you could just put the beads in a glass jar and put the jar in a regular fridge, no need to buy a cooler. The cooler pulls out cups of water a day at first, I don’t know how many desiccant packs it would take, but it would be a lot.
Thanks for this post.
I built one using a 15 bottle wine fridge I got off Marketplace cheap. Already had the dehuey from years back. Inkbird WIFI versions were selling for 60CAD last weekend. So all in, under 200CAD, and a couple hours of my time.
My dehumidifier also had that weird third set of orange wires, it went to the PCB terminals labelled FUSE, which I assume means it's a thermal fuse, given it's embedding in the plastic shell and the look of the component.
I did modify the design slightly by mounting some 4" height adjustable legs to the fridge, to make adjusting level easier, andI removed the drip tray. With the new legs I can slide a much larger container directly under the drain hole, and it's removable for emptying.
Working beautifully with your suggested 55F setpoint, and 76%RH starting point, and slowly, ramping down.
I built one using a 15 bottle wine fridge I got off Marketplace cheap. Already had the dehuey from years back. Inkbird WIFI versions were selling for 60CAD last weekend. So all in, under 200CAD, and a couple hours of my time.
My dehumidifier also had that weird third set of orange wires, it went to the PCB terminals labelled FUSE, which I assume means it's a thermal fuse, given it's embedding in the plastic shell and the look of the component.
I did modify the design slightly by mounting some 4" height adjustable legs to the fridge, to make adjusting level easier, andI removed the drip tray. With the new legs I can slide a much larger container directly under the drain hole, and it's removable for emptying.
Working beautifully with your suggested 55F setpoint, and 76%RH starting point, and slowly, ramping down.
Hook Daddy
Well-Known Member
Awesome, I look forward to hearing how it works for you. I’m thinking of doing the exact same thing for raising the cooler and adding a larger drip tray for mine as well. It’s really the only thing that requires me to be home when I start the process, so I have to make sure I’m going to be around the week I start out.