hustler1963
Member
First grow - multiple issues
Here is my set up
4x4x7 grow tent
600W dig HID/HPS cool tube vented in and out
10 in Osc fan 3 speed
CO2 reg w/20lb tank
8 plants started in basement mix in one gal coco containers, watering with 8 head manafold drip irrigation.
Digital temp/humidity
I am using an 18 rubbermaid container as res
purchased a large mixing tub from the Depot and have all 8 sitting atop multiple layers of coco matt
ordered an 8K BTU portable A/C which is enroute
Problem #1
I took some advice from a hydro store guy and think he was guiding me to a bubblle bucket (5 gal0 system.
I started upgrading before I knew it and have gone out and bought all this neat stuff. (e.g. Dig PH tester, PPM Tester) and now due to heat the new a/c unit.
The plants are about 2 mos old starting from seed and range from 20 inch as low as 8 inches. They are healty, but I can alreay see I am not going to have room for eight.
Started flowering and on day 5
been fighting high temps 90-94 degrees inside.
I have decided that my next grow will be aeroponic, but I have to nurse this one through for the next couple of months.
The basement mix is causing my PPM meter to read high due to the residue of the basement mix and I can only guestimate by adding water, etc.
I have not done much foliar feeding, occasional misting with hute mix.
I need suggestions quick on how to handle my selection on the medium and whether I will need to transport to new pots, but my setup is all wrong.
Need help
Here is my set up
4x4x7 grow tent
600W dig HID/HPS cool tube vented in and out
10 in Osc fan 3 speed
CO2 reg w/20lb tank
8 plants started in basement mix in one gal coco containers, watering with 8 head manafold drip irrigation.
Digital temp/humidity
I am using an 18 rubbermaid container as res
purchased a large mixing tub from the Depot and have all 8 sitting atop multiple layers of coco matt
ordered an 8K BTU portable A/C which is enroute
Problem #1
I took some advice from a hydro store guy and think he was guiding me to a bubblle bucket (5 gal0 system.
I started upgrading before I knew it and have gone out and bought all this neat stuff. (e.g. Dig PH tester, PPM Tester) and now due to heat the new a/c unit.
The plants are about 2 mos old starting from seed and range from 20 inch as low as 8 inches. They are healty, but I can alreay see I am not going to have room for eight.
Started flowering and on day 5
been fighting high temps 90-94 degrees inside.
I have decided that my next grow will be aeroponic, but I have to nurse this one through for the next couple of months.
The basement mix is causing my PPM meter to read high due to the residue of the basement mix and I can only guestimate by adding water, etc.
I have not done much foliar feeding, occasional misting with hute mix.
I need suggestions quick on how to handle my selection on the medium and whether I will need to transport to new pots, but my setup is all wrong.
Need help