randomseed
Active Member
If you had a good way to control the temp during the recovery phase (sous vide) you could go start to end in under two hours total.
More Money then Brains -OR- hey look I got a new Tamisium Extractor!
- Thread starter randomseed
- Start date
randomseed
Active Member
Me thinks acetone is gonna get the tap text time.
randomseed
Active Member
"completely" - of cource not, that being said its a hell of a lot safer then any other way out there of doing it short of commericial lab equipment.
Is it safer then discharging butane through tubes onto glass dishes to be evaporated in open air.....shit yes.
Can you still blow your face off with it.....shit yes.
randomseed
Active Member
bout as straight forward as anything Ive seen, nice.
Sr. Verde
Well-Known Member
I'd get one if the oil was somehow better... But I don't see how it's possible..
Matt Rize you say that you only have the tami BHO because you know it's butaneless? But I'm confused as you say to use an additional solvent to get it out of the collection chamber? Doesn't that re exposure to another solvent defeat the idea the tami extractor?
I'm confused... Somewhat tired of tubes, but sticking with them because it's simple and I don't see how something like the tami could make it better! Honestly..!
And that sucks that you can't get the N-Butane so easy now. That was one of the appealing aspects of the tami.. Using higher quality butane.
Matt Rize you say that you only have the tami BHO because you know it's butaneless? But I'm confused as you say to use an additional solvent to get it out of the collection chamber? Doesn't that re exposure to another solvent defeat the idea the tami extractor?
I'm confused... Somewhat tired of tubes, but sticking with them because it's simple and I don't see how something like the tami could make it better! Honestly..!
And that sucks that you can't get the N-Butane so easy now. That was one of the appealing aspects of the tami.. Using higher quality butane.
Matt Rize
Hashmaster
I said that I only smoke Tamisium made BHO because I don't support open blasting. Tami bho is "better" because the extraction process is 100x times more safe.I'd get one if the oil was somehow better... But I don't see how it's possible..
Matt Rize you say that you only have the tami BHO because you know it's butaneless? But I'm confused as you say to use an additional solvent to get it out of the collection chamber? Doesn't that re exposure to another solvent defeat the idea the tami extractor?
I'm confused... Somewhat tired of tubes, but sticking with them because it's simple and I don't see how something like the tami could make it better! Honestly..!
And that sucks that you can't get the N-Butane so easy now. That was one of the appealing aspects of the tami.. Using higher quality butane.
Second "carrier" solvents are totally not needed, and I would not use one.
The tami filters the solvents, whereas open tube blasting has no prefilter. This step removes the crap lube (paraffin) in the torch lighter refill cans.\
Take this in to consideration. I am going to blast a half pound of buds. If I use my tami, I need to add about 3 cans of gas to the recollection tanks Im using to blast. If I'm running an open system, I'm going to use a dozen or more cans of tane because im not recollecting the solvent. This makes a serious impact as those korean cans of mixed gases are not recyclable.
Gastanker
Well-Known Member
Crazy hippie trying to save the world!
Does the tami really have a prefilter that can strip out the paraffin? Paraffin as a solute in butane has got to be pretty small and considering the unit is made to extract paraffins along with the essential oils from other herbs why would they put a filter that small on the devise? I guess it could be part of the gas refill unit?
Regardless there has to be much less contaminants - 3 bottles of butane has x contaminants, 12 bottles has 4x - four times the amount. I really want to try some tami BHO versus standard now.
cannabineer
Ursus marijanus
You can't filter out the paraffin. It's in solution. cn
SdY183
Active Member
it's reclaiming the contaminants along with the solvent so i think you come out about even on that one. the advantage is in using 25% of the butane and the safety/health concerns of not releasing a whole case of toxic and explosive gases in whatever area you happen to be working.
Matt Rize
Hashmaster
these gases are non-toxic. what contaminants other that lube are in these torch lighter refills?
CN--- if you've ever looked in a Tami prefilter, you would see what I see, paraffin wax.
cannabineer
Ursus marijanus
I can't argue with experience (I've only used distilled extractants) but if there is paraffin in the filter, I am inclined to believe that you're dealing with a suspension of paraffin in a saturated solution.
If I had a Tamisium, I'd do a "blank" run with canned gas ... and see how much paraffin etc. ended up in the goods flask. I'm wagering the filter got only the suspended bits. Then I'd have reclaimed/distilled butane ready for a real quality run. cn
If I had a Tamisium, I'd do a "blank" run with canned gas ... and see how much paraffin etc. ended up in the goods flask. I'm wagering the filter got only the suspended bits. Then I'd have reclaimed/distilled butane ready for a real quality run. cn
randomseed
Active Member
The most straight forward reasons a tami is mmany times better then pure tubing is control over the primary parameters that determine quantity and quality
Time
Temp
Pressure
You gain control over all three and can adjust as you see fit during any stage....THAT is the true power of the tami.
Im just getting started with the control params and already the product is better then anything Ive PERSONALLY seen before (in 15 years of bumping into BHO here and there).
Time
Temp
Pressure
You gain control over all three and can adjust as you see fit during any stage....THAT is the true power of the tami.
Im just getting started with the control params and already the product is better then anything Ive PERSONALLY seen before (in 15 years of bumping into BHO here and there).
I'd get one if the oil was somehow better... But I don't see how it's possible..
Matt Rize you say that you only have the tami BHO because you know it's butaneless? But I'm confused as you say to use an additional solvent to get it out of the collection chamber? Doesn't that re exposure to another solvent defeat the idea the tami extractor?
I'm confused... Somewhat tired of tubes, but sticking with them because it's simple and I don't see how something like the tami could make it better! Honestly..!
And that sucks that you can't get the N-Butane so easy now. That was one of the appealing aspects of the tami.. Using higher quality butane.
randomseed
Active Member
Proper.
They actually put in the manual that if you are really recapturing most-all your gas back that the first run basically serves as a purification run, the wax won't recover and will end up in your first run product.
Like you are saying an empty run would go miles in determining how much solids are really in solution in your base 'tane.
Combine with the cold pressure purge I explained a few posts ago and I think you can get pretty far in terms of consumable quality purity. Although in some ways its an always getting halfway there kind of problem.
What Verde is on about the transfer solvent is indeed true although it is not a required thing in usage. It just makes getting your stuff out of the tami easier but then yes you got a whole new thing to deal with. That being said transfer solvents are common in almost all lab proccess and is not that complicated an issue to deal with.
Im have not used a transfer solvent yet but plan on trying out acetone (should be easy to get back out of the oil) and also just pure water......since the oil wont mix Im thinking I should just be able to pour the water+oil out and just pluck the oil off the top.
They actually put in the manual that if you are really recapturing most-all your gas back that the first run basically serves as a purification run, the wax won't recover and will end up in your first run product.
Like you are saying an empty run would go miles in determining how much solids are really in solution in your base 'tane.
Combine with the cold pressure purge I explained a few posts ago and I think you can get pretty far in terms of consumable quality purity. Although in some ways its an always getting halfway there kind of problem.
What Verde is on about the transfer solvent is indeed true although it is not a required thing in usage. It just makes getting your stuff out of the tami easier but then yes you got a whole new thing to deal with. That being said transfer solvents are common in almost all lab proccess and is not that complicated an issue to deal with.
Im have not used a transfer solvent yet but plan on trying out acetone (should be easy to get back out of the oil) and also just pure water......since the oil wont mix Im thinking I should just be able to pour the water+oil out and just pluck the oil off the top.
randomseed
Active Member
Where are you guys seeing these? I'm about to build a carbon prefilter for mine but would rather have something made by better hands.
Matt Rize
Hashmaster
they sell all sorts of attachments. contact the owner, im probably not even supposed to talk about it.
randomseed
Active Member
Not listed anywhere, is it ok if I inquire with them or will you get blasted?
Most the extras seem to be for the bigger model, I cant even get the heating/cooling jackets for mine
I think im going to rip a page out of your playbook. My bubble machines been sitting around feeling left out for quite some time now, think we are going to try a Rize up style washing of the big weight and then blasting that instead of trim. I'm starting to see all the toys forming together into THCtron.
Matt Rize
Hashmaster
just dont mention that anybody told you anything.Not listed anywhere, is it ok if I inquire with them or will you get blasted?
Most the extras seem to be for the bigger model, I cant even get the heating/cooling jackets for mine
I think im going to rip a page out of your playbook. My bubble machines been sitting around feeling left out for quite some time now, think we are going to try a Rize up style washing of the big weight and then blasting that instead of trim. I'm starting to see all the toys forming together into THCtron.
OGEvilgenius
Well-Known Member
I believe Subcool mentioned that Dioxide's tami extraction still has very small trace amounts of butane (much much less than standard, but still trace amounts). It is totally possible they are simply not doing it as well as Matt however. Seems like it would be hard to get rid of all the butane. But the way I see it is you almost assuredly will receive more butane lighting something with a lighter.I'd get one if the oil was somehow better... But I don't see how it's possible.. Matt Rize you say that you only have the tami BHO because you know it's butaneless? But I'm confused as you say to use an additional solvent to get it out of the collection chamber? Doesn't that re exposure to another solvent defeat the idea the tami extractor? I'm confused... Somewhat tired of tubes, but sticking with them because it's simple and I don't see how something like the tami could make it better! Honestly..!