More Money then Brains -OR- hey look I got a new Tamisium Extractor!

[Matt Rize]

I believe Subcool mentioned that Dioxide's tami extraction still has very small trace amounts of butane (much much less than standard, but still trace amounts). It is totally possible they are simply not doing it as well as Matt however. Seems like it would be hard to get rid of all the butane. But the way I see it is you almost assuredly will receive more butane lighting something with a lighter.

But no one uses lighters anymore. I don't even know where my bic is. Dabs all day and night.

And for the records, its not me w the tami

I generally dont smoke bho that has not been "drying" for a full month.

 

[str8sativa]

View attachment 1985644 fresh batch of williams wonder moon rocks

 

[str8sativa]

closeup golden goodness

 

[Dan Kone]

View attachment 1985644 fresh batch of williams wonder moon rocks

What are moon rocks exactly? I see them all the time, just not sure what makes something a "moon rock".

 

[Matt Rize]

What are moon rocks exactly? I see them all the time, just not sure what makes something a "moon rock".

its budder, just more slang.

 

[str8sativa]

but its harder then butter almost like crack rocks and breaks up into powder easy to sprinkle on bowls

 

[OGEvilgenius]

But no one uses lighters anymore. I don't even know where my bic is. Dabs all day and night. And for the records, its not me w the tami I generally dont smoke bho that has not been "drying" for a full month.

I hear that, I guess what I'm saying is I doubt a microscopic amount of butane is going to be any worse for you than going outside and standing on the street for 3 seconds.

 

[Dan Kone]

but its harder then butter almost like crack rocks and breaks up into powder easy to sprinkle on bowls

That's what I've seen called "moon rocks" at dispensaries too. Never necessarily looked like an oil based product to me.

 

[str8sativa]

its a step past oil i like cause it seems really clean minimal butane residue, the oil seems dirty some times even after purging

 

[Matt Rize]

its a step past oil i like cause it seems really clean minimal butane residue, the oil seems dirty some times even after purging

oh really?

do share what this step is?

 

[str8sativa]

show me yours ill show you mine. i know you have a flick of the wrist to make it ice wax

 

[Matt Rize]

show me yours ill show you mine. i know you have a flick of the wrist to make it ice wax

are you joking? I have an epic sized thread in this subforum where I detail my whole process. it has 26K hits, you cant miss it.

i dont even care about your bho, but it doesnt look great so I was wondering what you were referring to. no worries.

 

[str8sativa]

ive seen it. the bho doesnt look great? in oil or butter form? what do you mean

 

[Matt Rize]

ive seen it. the bho doesnt look great? in oil or butter form? what do you mean

its no hammond (does everyone know this term? soft shatter or soft jolly rancher texture). and its not an erl. it looks very waxy. so... i ask you, what is so special about it? My tutorial has 26K hits and endless research put into it, it is not an issue. I usually dislike any solvent extracts that are very waxy. you don't have to tell me if you don't want to, but don't pretend like my tutorial isn't in this same forum. i have no secrets anymore. thats what sets me apart from the other hashmasters.

water purged?

dissolved and filtered?

dry ice in the blast tube?

for sure you whipped it... what else.

 

[str8sativa]

i prefer butter over the glass one step passed that kinda to. and that was right after it was made has since dried and is more crumbly. ive tried making bubble from your video and couldnt get full melt like yours props. so you blast it into the pyrex that is sitting in almost boiling water let it bubble for about ten minutes pop the bubbles, do a zig zag pattern in the oil which will make a bunch of small bubbles.(this is first water purge) then bring the pan inside straight into a second boiling water bath, let it bubble for about ten minutes pop any remaing bubbles and start scraping the oil together in middle of pan,it will still be a dark oil at this point. this is where i do it a little different then most people take the pyrex dish with the oil glob and put it in the fridge for a rapid 15-20 minute cooling. have boiling water standing by for third and final hot water purge, put the cold pyrex dish into the slightly less then boiling water (it will not crack or explode trust me) let the oil warm for a minute start pushing and spreading it around with dabber begin to whip it will go from dark to a lighter peanut butter color within 2 minutes. keep whipping and spreading the oil and it will start to solidify before your eyes and turn bright yellow gold flakes every time no matter the strain.

 

[pharmacoping]

I got one last year and it paid for itself in a month. after a learning curve this will be second nature to you, and your product will just keep getting better. so cool to see someone else serious about safety, toxicity, and purity....some of the reasons we made the plunge.good luck man ! I only use buds now, and final shake. produces a much higher purity and potency, the kind we chase. scraps go to the bunnies !with some temp manipulation, you can get different oils out. your product should be dried before you extract. I put it all in a big zip and crush it, press it down with a dowel, packed pretty hard, takes about 2 hours to extract, recover 95-100% of the butane. with a hotplate/freezer its a fast recovery. peace1- what goes in my tamisium2- what comes out( I use 99%iso for a carrier, bout 10ml. no scraping here, pours out, gentle heat decarboxylates the cbd/thc and evaporates the iso, checked by weight of in/out. 3- assembled4mag stirrer-I use it lots, but activated charcoal is stirred with my oil for some time, especially for amber glass, or shatter, gets the material clear, like thc is supposed to be. 5 - what comes out of a run, about 9 grams of one hit wonder.the lab pure butane was apian in the ass, but I get it now, bout 200 bucks for bbq size tank

 

[pharmacoping]

everything is tare weighted in the beginning of each run. when the extraction is finished you can see the numbers are as exact as ones scale is accurate. 100% of the butane used to extract is purged from the oil before its gathered, or even seen. The numbers are checked and re checked because they are live. there is no butane remaining in the oil, and besides, oil is heated before it gets to your lungs, and all butane wil evaporater before that. in pvc or contraption extraction, there is more than butane firing up at that toke. propane and most important mercaptan, and about 12 other gases( I can list if you need it) i'm talkin about vector5x too.
the tami encloses the entire operation resulting in no exposure to air or you. the system is non flammable when used correctly. with a series of cooling and mixing and warming, like said earlier, it becomes this rock candy stuff as it dries up. we dont like it around the thumb, but ear wax and jelly are hot.

 

[Dan Kone]

Mine is coming next week! I've got all my trim sorted and am really excited!

 

[pharmacoping]

read the simple manual, twice even, and get an understanding of the chemical aspect of this type of extraction. It's amazing if you have no chemistry background and the machine is a piece of functional art if you do.
flowers at ambient temp extract best. the slower your butane is released the more waxs you'll have in your oil. no biggy for newbies, but we taste the impurities, and so will you , soon.
I freeze my empty vessel, warm my butane vessel, and extract within minutes, wait about an hour, when the temp of the mj vessel stabalizes(no more tane in the weed), freeze my empty tane vessel, warm the "oil holding tank" and recover all of the liquid butane in two hours, for next time. as instructed i got the siphon for the large 99.5%(you cant afford 99.9%) butane canister, like a bbq propane tank, so when the valve is cracked no gas comes out, it sucks liquid from the bottom of the tank, so we only deal with the liquid, not gas.

I use 10-20 ml , splash, of 99%rubbing alcohol from meijers to put in the holding tank prior to extraction. no scraping, yuck. my oil pours right out when done, heated, evap,decarboxylated, and charcoal stirred/filtered all in one shot. any other alcohol has icky sugars in it that dont evap when heated, like everclear, which is great for a thc spray, or tincture, but not for smoking.
have a blast man, be very very respectful of this machine. with 400grams of liquid butane, not to mention any butane stock, if you had a leaky o-ring, and a flame, you will die, and that end of your house will fall. no flames, no leaks, make sure.... comes with dozens of o rings, good for about 10 extractions each. then to home depot in the big blue drawers ! I could extract in my sleep now,( Not really, for the pic mongers) but it is second nature after a month or two. works good with herbs and lemon balm, and uh....other yard flowers too, ahem.

 

[Dan Kone]

read the simple manual, twice even, and get an understanding of the chemical aspect of this type of extraction. It's amazing if you have no chemistry background and the machine is a piece of functional art if you do.

Why is that? Are people without chemistry degrees incapable of following instructions?