• Here is a link to the full explanation: https://rollitup.org/t/welcome-back-did-you-try-turning-it-off-and-on-again.1104810/

Bohemoth perpetual all-in-one armoire conversion

M

morvis

Well-Known Member
Craigs List score for 100$ Nice, a hair over 5 1/2 ft tall.


Not bad at all. Flowering up top, clone/veg in the bottom left and drying box in the bottom right. But could use a bit of personal touch....


Open up the sides a bit up top


Add a bit of depth. 3 ft to the back wall from the doors, and 51" between the new plywood walls.


Dropped the flowering chamber floor a bit



Ran out of materials for this weekend's session. Next up is flooring out the back big empty space, and making a removable extension to the flowering box floor that's there, in the case that I might want to run something a bit taller in back, but it will most likely just be a scrog cabinet. And some proper vent work complete with a carbon scrubber Little bit at a time, 50-75 bucks going into it a paycheck. After the box is done, then i move on to the custom COB lighting system. Hoping to have a breath of life in here by the end of the year.
 
mrpuffins

mrpuffins

Well-Known Member
Nice, Good Luck!!

Got a slightly smaller dresser/cab I found at Goodwill, I am going to hollow it out and run next to my other box.

I'll be following!
 

Attachments

goodro wilson

goodro wilson

Well-Known Member
image.jpg image.jpg image.jpg image.jpg Wish you would have finished this already so I could have gotten ideas from you
I have a wardrobe almost the exact same size as yours and I just converted it yesterday
I don't like how mine is set up at the moment bc my 6"fan/filter is taking up floor space
After a run or two if I can save some money I'll switch to cobs also
You went a few steps further than me tho I just cut a hole in the floors of top and bottom for 6"ducting covered the bak opening with cardboard hung a 600 and crammed the filter fan

In the bottom half I Gutted and just lit with 4 household leds a single tube 2ft t5 for now
Thinking about makomg a thread on it
 
M

morvis

Well-Known Member
goodro wilson said:
View attachment 3809884 View attachment 3809881 View attachment 3809880 View attachment 3809874 Wish you would have finished this already so I could have gotten ideas from you
I have a wardrobe almost the exact same size as yours and I just converted it yesterday
I don't like how mine is set up at the moment bc my 6"fan/filter is taking up floor space
After a run or two if I can save some money I'll switch to cobs also
You went a few steps further than me tho I just cut a hole in the floors of top and bottom for 6"ducting covered the bak opening with cardboard hung a 600 and crammed the filter fan

In the bottom half I Gutted and just lit with 4 household leds a single tube 2ft t5 for now
Thinking about makomg a thread on it
Click to expand...
It's not bad tho. I wasn't having that cardoard/tv box cut out in the back it was no doubt a spot for smells to leak out =) Then figured since I was going there anyway, might as well make it deeper.
 
M

morvis

Well-Known Member
Almost done! Painted it all gloss black so it was all one solid color and it matches my headboard on my bed. Moving it into the bedroom later today and then start getting it ready for work!




Snagged a TD150S for $140 off ebay using MTurk money. May be a bit of an overkill for that box but it will be able to be something I can use for quite a while. Just a few finishing touches left and this guy will be ready! I've got 70 more bucks in my Turk fund about to drop on a mess of cobs and going to make my own scrubber.



Oh yea, and my other project for the day
 
M

morvis

Well-Known Member
Eeh, I might play around with them later, going photo fem'd for my first round of seeds. Have some super lemon haze, bubba kush, white widow, jack herrer and skunk #1 on order.
 
Tim Fox

Tim Fox

Well-Known Member
morvis said:
Craigs List score for 100$ Nice, a hair over 5 1/2 ft tall.


Not bad at all. Flowering up top, clone/veg in the bottom left and drying box in the bottom right. But could use a bit of personal touch....


Open up the sides a bit up top


Add a bit of depth. 3 ft to the back wall from the doors, and 51" between the new plywood walls.


Dropped the flowering chamber floor a bit



Ran out of materials for this weekend's session. Next up is flooring out the back big empty space, and making a removable extension to the flowering box floor that's there, in the case that I might want to run something a bit taller in back, but it will most likely just be a scrog cabinet. And some proper vent work complete with a carbon scrubber Little bit at a time, 50-75 bucks going into it a paycheck. After the box is done, then i move on to the custom COB lighting system. Hoping to have a breath of life in here by the end of the year.
Click to expand...
Any update
 
M

morvis

Well-Known Member
Tim Fox said:
Any update
Click to expand...
It's been moved into my bedroom and I have ordered 5 clu048's and a mess of seeds. I have next week off work and taking that time to get the exhaust fan mounted and all the duct and vent work done on it and a couple tweaks. Hopefully the seeds get here during that time so I can get those going as well.
 
Uberknot

Uberknot

Well-Known Member
morvis said:
Almost done! Painted it all gloss black so it was all one solid color and it matches my headboard on my bed. Moving it into the bedroom later today and then start getting it ready for work!




Snagged a TD150S for $140 off ebay using MTurk money. May be a bit of an overkill for that box but it will be able to be something I can use for quite a while. Just a few finishing touches left and this guy will be ready! I've got 70 more bucks in my Turk fund about to drop on a mess of cobs and going to make my own scrubber.



Oh yea, and my other project for the day
Click to expand...

Hell yeah! :D
 
Tim Fox

Tim Fox

Well-Known Member
morvis said:
It's been moved into my bedroom and I have ordered 5 clu048's and a mess of seeds. I have next week off work and taking that time to get the exhaust fan mounted and all the duct and vent work done on it and a couple tweaks. Hopefully the seeds get here during that time so I can get those going as well.
Click to expand...
I just started using 4 clu048 4000k myself super nice cobs
 
You must log in or register to reply here.
Top