DIY with Quantum Boards

Mikenike

Well-Known Member
Look at the test data on each part number. It states the test current and forward voltage-it's multiplication after that.
I’ve got some extra Hinflux 2ft double rows, so test current is 1.38A and forward voltage is 48.2= 66.5w, is that the max wattage or typ?
 

Joe Cocio

Member
Whoops... sorry, i thought i searched the thread but evidently i found my answer


i ordered the HLG 600 light that i am putting together, would you guys know of any issues putting the driver on the wall and then running DC lines up to the boards?
 
Last edited:

coreywebster

Well-Known Member
I’ve got some extra Hinflux 2ft double rows, so test current is 1.38A and forward voltage is 48.2= 66.5w, is that the max wattage or typ?
Its just the wattage at test current, the data sheet will say the max current , might also show how the forward voltage changes as the current changes too.
 

Moflow

Well-Known Member
Datasheet sez the Hinflux L09 max is 52.1v 1.38A so ~ 71 watts.
I run mine at 40 watts a strip though....... nice efficiency
 

Mikenike

Well-Known Member
Have a couple that I wanted to put under a shelf for cloning. 2 or 3 probably at 20-30w each 10” above my cloner. So since it is 48.2v then I can use any Meanwell driver that ends in 48? Think I got it thanks y’all
 

Moflow

Well-Known Member
Have a couple that I wanted to put under a shelf for cloning. 2 or 3 probably at 20-30w each 10” above my cloner. So since it is 48.2v then I can use any Meanwell driver that ends in 48? Think I got it thanks y’all
I use 3 x 2ft double row f strips for vegging, 84 watts, great results.
They're on an hlg 120h 54A I'd lying about.
 

Cannademik

Active Member
My led strips started to flicker really hard when i checked them this morning. It was too hot to touch and I turned it down. It did stop when i had the tent zipper opened. Could that be why? Im gonna rewire so the driver isnt on top of the alum sheet.
 

pop22

Well-Known Member
you went over the driver's max output, as shown by dimming curing the issue.

My led strips started to flicker really hard when i checked them this morning. It was too hot to touch and I turned it down. It did stop when i had the tent zipper opened. Could that be why? Im gonna rewire so the driver isnt on top of the alum sheet.
 

Budzbuddha

Well-Known Member
Little tent love ....

Sour Stomper
King Kong Poison
Gojiberry


All is pretty much on track with the layered mix and water diet . Quantums are purring along . And getting some breeding tests planned.
I gave the girls a special watering with a 1/4 tsp of Great White myco to keep the soil happy. I have been letting tap vape off overnight to temper the chlorine and the plants + myco are happier for it . No weird purple stems so far. Temps are up to 82 to keep them comfortable.


GOJIBERRY continues to get more LST and shaping and is responding well.

8B620615-CA19-467C-92B8-C9BB18C01A55.jpeg

Sour Stomper have been topped and are also getting cropped and had one topping.
They smell dank as hell ! Played around with twin tower tops :mrgreen: :leaf:

392879A3-F977-44BC-9B88-4271FAA25C4A.jpeg
F688661C-7E71-4657-AECE-FF56E30CC4E0.jpeg

King Kong poison are running well as a pack and shows the consistency from Hazeman Seeds .... always great seeds. They are about 3 nodes in and doing good. They also got the myco “ water “.

5FD38C73-4CCE-4180-AAAD-871C29AD0C22.jpeg

Solo cup in middle is another freshly popped KKP that will be STS later for fem pollen and my breed experiment for the KKP and Strawberry Diesel cross. Once I get going on that I will start a separate thread for those interested in some pollen chucking.

79AA5396-48CC-4FC3-9C1B-9B660D8D0898.jpeg
F00AAE78-6A52-49D4-8114-CB34853C8226.jpeg

#QuantumLife :bigjoint:
 

daveybc

Well-Known Member
If your driver is older consider getting a back up. Especially if your garden in important as most are. Drivers will fail, especially if they are running hard and hot. Since yours was flickering is enough to consider. I always think about redundancy when putting together a fixture. For instance running a triple qb fixture why not buy a 240 watt driver and a 120 54v watt driver rather than a 320 watt. A driver fails and you will still be in business, even on the 120 w 54v driver you can rewire for 3 boards. Imagine a driver fail on a Friday night :-(

My led strips started to flicker really hard when i checked them this morning. It was too hot to touch and I turned it down. It did stop when i had the tent zipper opened. Could that be why? Im gonna rewire so the driver isnt on top of the alum sheet.
 

daveybc

Well-Known Member
I am just about to pull the trigger on 4 of these qb120 in a 20-24" x 4' x3' h space for veg and early flower. Just struggling on the colour of either 3500k or 4000k. I was thinking 3500 ( a bit better for flower still good veg ) but 4000k better for limiting stretch. Any input is appreciated

QB 120 grown bud, Cookies Auto from Dinafem. From a solo cup grow

View attachment 4409254
 
Top