ShabbaDanks
Active Member
The gut never lies...
Ttystikk's vertical goodness
- Thread starter tystikk
- Start date
ttystikk
Well-Known Member
Yes.
Thanks!
Screen is 6' tall, rafters are just under 8'. Just enough room for the 27 gallon tubs.
Vnsmkr
Well-Known Member
HockeyBeard
Well-Known Member
I've been hearing about this method. You get 140ish% more canopy space in the same area with this technique as you do horizontal.
ttystikk
Well-Known Member
Aisles and walkways are not optional, yet somehow never make it into people's calculations:
I ran a 16'x11' room flatlander style under 8kW of HPS in Magnum Ocho hoods, double barrel style. I had four screens, 7'x3.5' each, so I could get around them. This worked out to about 100 ft² of actual trellis area.
Vertically, I can put as much as 360 ft² in the same room. The challenge then becomes lighting and cooling it!
chinuh man
Member
I am very intrigued sir. I like how everyone was stating this was clearly a waste of time at the beginning of the thread.
My first question (seeing as how I am in the process of putting together my first grow setup) is for this type of method you must use sativa dominant strains... correct? or gain you also grow indica's like this efficiently?
My first question (seeing as how I am in the process of putting together my first grow setup) is for this type of method you must use sativa dominant strains... correct? or gain you also grow indica's like this efficiently?
ttystikk
Well-Known Member
Some strains don't do well, but they tend to be the scraggly ones. Indicas grow just fine as long as the structure allows it. The key is getting them big enough.
I remember a lot of people telling me that. My instincts said different, so I got busy.
chinuh man
Member
so how long would you typically veg before flowering. And what light do you currently use? the reason I ask is because I have seen you in the diy led cob threads and I am curious to know if you have built a cob vertical light for your setup?
ttystikk
Well-Known Member
Two to three months, including rooting the clones.
Currently using the Philips 860W CDM lamp on the only ballast it can use, a thousand watt magnetic ballast set to MH. Cheap, lol
No, I haven't. I'm just now researching how to try something like that.
heckler73
Well-Known Member
That's funny. As I was reading this page I wondered that, too, "How would LEDs fare in this style?"
Port the heat through a tube, fan on top. Basically build like a "Corn Cob", scaled up. Use a piece of extruded aluminum hollow-structure, like Doer's liquid-cooled light-bar. Cut-out sections to pass cooling fins into the tube. There will still be a gradient of heat, though, but it should be manageable with sufficient airflow.
chinuh man
Member
ttystikk
Well-Known Member
LOL, I seem to have a way of doing that to people!
ttystikk
Well-Known Member
That's funny. As I was reading this page I wondered that, too, "How would LEDs fare in this style?"
Port the heat through a tube, fan on top. Basically build like a "Corn Cob", scaled up. Use a piece of extruded aluminum hollow-structure, like Doer's liquid-cooled light-bar. Cut-out sections to pass cooling fins into the tube. There will still be a gradient of heat, though, but it should be manageable with sufficient airflow.
Heat is actually one of the biggest issues. I've been doing some thinking on that, too.
chinuh man
Member
nothing some liquid cooling can't fix. your heat issues stem from the type of lights used. Cobs would eliminate any heat issue. Like Heckler said a fan on top in a cylinder shaped piece of aluminum. All the heatsinks inside... maybe even another fan on the bottom as I'm sure it will still hang from the ceiling rather than mount to the floor. Liquid cooling probably wouldn't even come into play.
ttystikk
Well-Known Member
This is absolutely untrue. Watts are watts, and a certain number of watts will generate a predictable amount of heat. It's easy to be misled by high efficiency numbers, but all that light ends up making heat as well.
I'm already adequately cooling the rooms, so I doubt I'd need additional room cooling.
Like I said, there's a lot of things to think about...
Similar threads
