Methods for highest possible yield indoor

jimmykimmel

Active Member
Hey guys, so I've been growing for a few years now and I'm wondering if there would be a better way to utilise the space I've got.

It's in a bedroom about 3.5mx3m

I usually stick 20-26 in there in 15 litre pots and use 4 600w hps

They usually get to about 3 foot including pot

Yield wise it's usually between 80-125 ounce which I am happy with but I'd like to hear your opinions on increasing yield.

Could I get more on less plants? Maybe a scrog or a sea of green.

And also if i have less plants I'm
Guessing veg time is going to be a lot longer so would it be worth it in the long run?

Appreciate any advice
 

Lordhooha

Well-Known Member
Hey guys, so I've been growing for a few years now and I'm wondering if there would be a better way to utilise the space I've got.

It's in a bedroom about 3.5mx3m

I usually stick 20-26 in there in 15 litre pots and use 4 600w hps

They usually get to about 3 foot including pot

Yield wise it's usually between 80-125 ounce which I am happy with but I'd like to hear your opinions on increasing yield.

Could I get more on less plants? Maybe a scrog or a sea of green.

And also if i have less plants I'm
Guessing veg time is going to be a lot longer so would it be worth it in the long run?

Appreciate any advice
Scrog those cats
 

Porky101

Well-Known Member
4x 600W is TOO LITTLE for 105 m2!!

That is = to 5.7w per square foot! You need 50W per square foot.

Your room needs atleast 10x 600W HPS. 14-16 being optimal.

If your seriosly using 2400W to light that space...then show pictures of your finished buds please...want to see what they look like.
 
Last edited:

Porky101

Well-Known Member
Look into cob led. Better than hps, expert growers will agree. Efficiency.
Expert growers will not agree. there is plenty of debate on the topic.

Even if he were to use LED, he would still need atleast 6,000W of LED to light that space....its a BIG space to light....especially for a flower room...
 

tusseltussel

Well-Known Member
16 600w lights? Jesus Christ that would cost thousands in electric lol
No not that I think someone miss calculated if new lights is your thing trade em for 4 1000s or add 2 600s
3.5 m that's like 11.5 feet right. 4 1000s with room to crawl around, you be set, cool tubed, co2 a/c huge plants
 

GardenGnome83

Well-Known Member
Expert growers will not agree. there is plenty of debate on the topic.

Even if he were to use LED, he would still need atleast 6,000W of LED to light that space....its a BIG space to light....especially for a flower room...
6000 watts of light that don't get as hot as the others. Energy-efficient less cost better light better bud
 

jimmykimmel

Active Member
4x 600W is TOO LITTLE for 105 m2!!

That is = to 5.7w per square foot! You need 50W per square foot.

Your room needs atleast 10x 600W HPS. 14-16 being optimal.

If your seriosly using 2400W to light that space...then show pictures of your finished buds please...want to see what they look like.
I said 3.5m by 3 metres lol not 35!!! I was like bloody hell 16 lights in that tiny room haha

I personally don't think there's anything wrong with my final product before, check my previous post they're about 5 and half weeks into flower and it's a 10 week strain of blue cheese
 

GardenGnome83

Well-Known Member
Expert growers will not agree. there is plenty of debate on the topic.

Even if he were to use LED, he would still need atleast 6,000W of LED to light that space....its a BIG space to light....especially for a flower room...
Also, high pressure sodium is not the proper Spectrum.
 

GardenGnome83

Well-Known Member
What is the proper spectrum ?
JimmyKimmei, nice looking grow.
Not just red, or yellow.
Blue is necessary, if you want it to look wet with resin. There are "conversion" bulbs, but I use an hps with a big blue spike. Ushio brand. Look it up.
 

Porky101

Well-Known Member
I said 3.5m by 3 metres lol not 35!!! I was like bloody hell 16 lights in that tiny room haha

I personally don't think there's anything wrong with my final product before, check my previous post they're about 5 and half weeks into flower and it's a 10 week strain of blue cheese
Please someone else back me up here if I am right or correct me if I am wrong:

3.5 meters x 3 meters = 10.5 Square meters.

1 meter = 3.2 feet.

10.5sqm X 3.2 = 336 Square feet

The reccomended lighting requirements for HPS is 50W per square feet.

50w x 336 = 16800W

For the space, you need 28 X 600W lamps for flowering.
 

RM3

Well-Known Member
Please someone else back me up here if I am right or correct me if I am wrong:

3.5 meters x 3 meters = 10.5 Square meters.

1 meter = 3.2 feet.

10.5sqm X 3.2 = 336 Square feet

The reccomended lighting requirements for HPS is 50W per square feet.

50w x 336 = 16800W

For the space, you need 28 X 600W lamps for flowering.
Google does conversions ya know

10.5m²= 113.0211ft²
 

Yodaweed

Well-Known Member
6000W all produce the same amount of heat. no matter if it is from HPS or LED. they will all heat your room up the exact same.

Less cost is not true, LED's are more expensive upfront.

Energy efficient yes, if that is ones priority.
This is correct, first law of thermodynamics and the law of conservation of energy make this true. 6000w of energy from any source will produce the same heat.
 

jimmykimmel

Active Member
Please someone else back me up here if I am right or correct me if I am wrong:

3.5 meters x 3 meters = 10.5 Square meters.

1 meter = 3.2 feet.

10.5sqm X 3.2 = 336 Square feet

The reccomended lighting requirements for HPS is 50W per square feet.

50w x 336 = 16800W

For the space, you need 28 X 600W lamps for flowering.
I don't know what's going off or if I'm retarded or something but there's no way in hell that room could accommodate 28 600w lights lol the whole room would be absolutely full, not to mention it would be about 50-60c in there lol. Even with heat tubes surely it can't need that much?

As you can see from the picture they're doing great 17000w would cost thousand a month
 
Top