veecoman
Active Member
Well guys I decided to start flowering today, its a little earlier than I wanted to, I wanted to wait untill the smaller tops in the middle of my plant reached the screen but the larger tops in the corners are already a couple inches through the screen, and by the time the smaller tops reach the screen the other ones will be like halfway to the lights. Soo hopefully after the stretch the smaller tops will make it to the screen(right now there 1-2 inches below screen). I planned on the tops being more even at this point but this is my first scrog and don't think I did to bad, and I definantly learned a lot! One question I have is about my lighting situation. I vegged with two 65w 5000k cfls for a total of 130w, and for flowering I was wondering if I should keep one of the 5000k's and switch the other with a 55w 2700k and add another 23w 2700k,( for a total of 143w) or use the 55w and the 23w, and switch the other 65w 5000k with a 30w 3500k, which would be 27 less wtts but more red spectrum? I hope that didnt confuse you guys too much haha. I know that more watts is better, but I also know you want red color temp for flowering.