end_of_the_tunnel
Well-Known Member
You got a closeup of the ones on your light? Do they look like 2.8mm x 3.5mm, or more square?
Lumatek Zeus 600 Pro
- Thread starter Moflow
- Start date
You got a closeup of the ones on your light? Do they look like 2.8mm x 3.5mm, or more square?
Airwalker16
Well-Known Member
Airwalker16
Well-Known Member
They're definitely 2835 form factor
end_of_the_tunnel
Well-Known Member
At over 500 of them on each Pro bar they got to be something economic. A whole lot of light.
dubstafari
Member
Btw I dropped the strips few times everything is working 
I putted it in 240x240 cm and it is pretty bright inside at 25% feels like youcan grow a lot at 150 W
NB!! TAKE OF STRIPS BEFORE MOVING THE LIGHT !!!
I putted it in 240x240 cm and it is pretty bright inside at 25% feels like youcan grow a lot at 150 W NB!! TAKE OF STRIPS BEFORE MOVING THE LIGHT !!!
Last edited:
You're right, good eye. Your leds have one corner on the negative side shaved off while this ledstar2835s at the Dongguan site have all the corners clipped.
Dongguan LED lights manufacturers | plant lights | high pressure lamp beads - Leda Da
Dongguan Ledstar Optoelectronics Co., Ltd was established in October 2008, it is one of China Torch Program Key High-tech Enterprises and well-known Brand Enterprises in Dongguan.Welcome to inquire: (86) 0769-2220-8080
en.led-star.cn
dubstafari
Member
3078 pieces at 600w will make those chips last very long I believe. Warranty is 5 year. I guess 1-2% PAR lost every year of using compared to 4-8% others. Have no phones now, will give you pictures later : )
Yesterday Lumatek replied to my inquiry last week about who manufactures the leds in the zeus pro. The answer was they wouldn't say. Only this,
"LUMLED is our own brand of diodes. We decided against using Lumiled and developed with your factory new, highly efficient diodes with our own branding."
I wanted to find out who makes them and how many hours they run before getting down to say a lumen maintenance of 80 (LM80). Just have to hope they are as good as other name-brand diodes. Oh well, still hope to buy the Zeus 600w Pro to test.
"LUMLED is our own brand of diodes. We decided against using Lumiled and developed with your factory new, highly efficient diodes with our own branding."
I wanted to find out who makes them and how many hours they run before getting down to say a lumen maintenance of 80 (LM80). Just have to hope they are as good as other name-brand diodes. Oh well, still hope to buy the Zeus 600w Pro to test.
Humple
Well-Known Member
They need to provide all the specs on these diodes if they want to be taken seriously in the commercial sector. Mystery components don't go over nearly as well these days.
chronnie49
Well-Known Member
It does seem strange they wouldnt offer more info on these diodes. I dont think I would spend a grand on a light without having more details.
dubstafari
Member
If they tell about the chips, china will copy paste it in 1-2 weeks in better price. What is strange about that ?
dubstafari
Member
How are you gonna test it ?
end_of_the_tunnel
Well-Known Member
Maybe they will offer a test report from a reputable Western test lab, at some date. More important are things like the output and efficiency, than actual identity of the diodes. And for the forward thinkers, true running temps, not some reading from a stabilised thermally controlled test chamber.
LM301 has become ubiquitous, its almost like people think theres only one way to skin a cat. That if a product doesn't have those it will not measure up.
PrometheanLeaf
Well-Known Member
Why is your growing space not a stable thermally controlled environment though?
end_of_the_tunnel
Well-Known Member
The concern is how well a product is designed to sink and dissipate heat away from diodes.
Some buyers might be reassured if the led luminaire test reports provide datasheet-like detail on ramp-up and operating temperature parameters measured at the pcb level. Possibly in the form of a graph of time/temp.
I guess it can have implications for things like lifetime and efficiency of product.
I have seen people mention Lumen Maintenance. Makes sense, especially where a lot of hot little diodes are crammed tightly together. One product might perform this service better than another, but the consumer cannot be sure with ambiguous reports.
chronnie49
Well-Known Member
Yea you guys make some good points about the info given about the diodes.
Im not looking to spend that much on a light right now anyways. Next run will be my first time using leds and will be adding 2 spider farmer sf1000 to 2 315 cmh. If i like the results maybe Ill upgrade to something like the zeus in the future.
Im not looking to spend that much on a light right now anyways. Next run will be my first time using leds and will be adding 2 spider farmer sf1000 to 2 315 cmh. If i like the results maybe Ill upgrade to something like the zeus in the future.
DankaDank
Well-Known Member
Technically you want stabilized operation performance specifications @ 25c ambient but you're correct many LEDs are tested at Tc 25c due to pulse measurements being a viable binning process.
Most LED manufacturers have simulators with Tj and Tc inputs. PPF and PPFD results should always be recorded at a stabilized operating temp when Ta = 25c
With a light meter. Then will have to put it to work and see how long it lasts compared to the COB's and Quantum boards we now use. A few years back I used those cheap Chinese LED rigs with the cheap little drivers and fans drawing around 300 watts maybe. They grew about as good as HPS watt for watt but didn't last very long and trying to get warranty replacement parts was a freaking hassle. So this rig, with mystery chips and driver and a 5 year warranty promise, seems sketchy alright. Lumatek is not a new company so am hoping these Zeus pros hold up for a few years at least. Wonder also about the durability of the two prong connectors on each of the light bars that are magnetically held together to the frame. From the video they look like they'd be fighting gravity every second to stay connected. Just seems they should have been designed to snap in from the top instead of up from below the frame.
dubstafari
Member
I still need to get 3 more lights to cover 240x240 cm . Will try one of those https://www.alibaba.com/product-det....41413.10.2a996f16248Dqq&fullFirstScreen=true and maybe 2-3 more zeus. Magnet is pretty strong, weight is on magnet and on the opposite site where is no connection and no magnet (contra).
Attachments
Those pics are nice. Thank you dubstafari for reporting on your zeus. Please keep us informed how it goes. If you want to change Light Energy into Mass ( grass) then it's ALL ABOUT THE PHOTONS and you must have quite the photon machine right there.